We design, make and fit fascia signage in Bilston and across the West Midlands, as one job under one contract. Removal of the old sign, repairs behind it and the new sign all sit on one itemised quotation.
Please have keys to any meter cupboards and shutter housings to hand when we survey in Bilston, because what sits behind them can change the drawing.

What makes fascia signage work well on Bilston premises?
Where the fascia on your Bilston premises has been overclad, we lift a sample at survey to see what is underneath. Original timber, cornice mouldings or tile may be worth keeping, and they change what the new sign should be.
Where a shutter box sits above the window, the sign has to be designed around it. We either house the box behind the fascia or adjust the panel, so nothing sits awkwardly proud of the frontage.
If your Bilston unit is narrow, a central door can split a small window into two weak ones. Moving the door to one side gives you a single confident pane, provided the layout inside still works.
Could fascia signage in Bilston need planning permission?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for fascia signage at premises in the Bilston area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
In England, signs at premises in the Bilston area come under the 2007 Advertisement Regulations. An unlit fascia sign generally needs no application under Class 5 of Schedule 3 if it sits on a wall containing a shop window, tops out at 4.6m or the first-floor sill if that is lower, and keeps letters to 0.75m high. Displaying a sign without the consent it needs is a criminal offence, so check before it goes up.
For Bilston, the usual route for planning and advert applications is through City of Wolverhampton Council, and we confirm that when we visit.
How much should you set aside for fascia signage in Bilston?
We would budget £395 to £1,995 plus VAT per sign. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
| Town | Bilston |
|---|---|
| Area | West Midlands |
| Postcode districts | WV1, WV13, WV14, WV2 |
| Planning authority | City of Wolverhampton Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 7 miles |
| Survey | Free for new work |
Questions about fascia signage in Bilston
Will you remove the old sign from my Bilston premises?
Yes. Taking down the old sign, clearing old fixings and making good are included in the itemised quotation. We tell you what we find behind it before going further.
What artwork do you need for a sign in Bilston?
Vector files such as AI, EPS or PDF are ideal, along with any brand guidelines. If you only have a low-resolution logo, it can be redrawn, and that time is shown on the quotation.
What if the fascia behind my old sign in Bilston is rotten?
We show you photographs and price the repair before going further. A short section of timber can often be spliced in, while a badly decayed fascia is better replaced with a new subframe.
Do I need listed building consent for a shopfront in the Bilston area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.
Does the Equality Act apply to a shop entrance in the Bilston area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.