Timber gives a shopfront in Bilston something metal can't: real depth, cast shadows and mouldings you can run your hand along. We draw each front to the measured opening and make it to those signed-off dimensions.
Please have keys to any meter cupboards and shutter housings to hand when we survey in Bilston, because what sits behind them can change the drawing.

How would we approach timber shopfronts for your Bilston premises?
A corner plot gives a timber front two faces and one chance to get the turn right. For Bilston premises on a corner, we'd use a pilaster or a canted bay at the angle, so the cornice wraps round without a clumsy mitre.
A south or west-facing Bilston frontage is hard on paint. We'd steer you toward a lighter colour or a more stable timber, and if the brand needs a dark finish, we'd plan a shorter repaint interval from the outset.
Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Bilston premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.
What should you budget for timber shopfronts in Bilston?
A sensible starting budget is £3,995 to £13,995 plus VAT for a typical frontage. What shifts the figure is whatever can't be seen yet, such as the condition behind the old frontage or the services running through it.
What consents could affect timber shopfronts in Bilston?
For timber shopfronts at premises in the Bilston area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
For Bilston, the usual route for planning and advert applications is through City of Wolverhampton Council, and we confirm that when we visit.
| Town | Bilston |
|---|---|
| Area | West Midlands |
| Postcode districts | WV1, WV13, WV14, WV2 |
| Planning authority | City of Wolverhampton Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 7 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Bilston
Can you copy a timber shopfront I've seen in the West Midlands?
We can work from your photo and borrow what makes it succeed, including proportions, moulding sizes and colour. The front is then drawn to your own Bilston opening.
Is timber a sensible choice for my Bilston frontage?
Usually, if you're happy with a repaint every 5 to 7 years. A survey shows how exposed the front is and whether the structure behind it is sound, and we'll tell you if aluminium would serve you better.
Will timber suffer on my Bilston frontage if it gets a lot of rain?
Not if the details are right. Sloped cills, sealed end grain and plinth blocks keep water moving, and the paint system then only has to deal with the weather, not trapped damp.
What rules apply to a fire exit door through a shopfront in the Bilston area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do I need planning permission to change a shopfront in the Bilston area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.