0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Timber shopfronts
  4. West Midlands

Timber shopfronts in the West Midlands

For the West Midlands businesses that care how the front of the building looks.

Seen a frontage you admire? Bring the picture to our first talk about timber shopfronts in the West Midlands, and we will work out what makes it succeed, from fascia depth to glass line, and what that means for your building.

Your frontage is read alongside its neighbours, so we note the fascia line, stallriser height and pilasters on either side before drawing timber shopfronts for the West Midlands premises. Matching those lines or breaking them on purpose can both work, whereas doing it by accident never does.

Painted timber shopfront with a moulded cornice, panelled stallriser and glazed double doors

Where do you start with timber shopfronts in the West Midlands?

Joinery arrives close to finished, so handling matters. We look at how long lengths of cornice and frame can reach an address in the West Midlands, and break them at joints we can hide if the route is tight.

Timber is a natural fit for food and drink. For a restaurant or bar in Birmingham, we'd design opening sashes or a serving hatch into the front, so the joinery earns its keep in summer and closes up snugly in winter.

What consents apply to timber shopfronts in the West Midlands?

Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for timber shopfronts at premises in the West Midlands area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.

How much do timber shopfronts cost in the West Midlands?

Until the survey is done, plan on £3,995 to £13,995 plus VAT for a typical frontage. Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.

West Midlands at a glance
AreaWest Midlands
NationEngland
Towns covered36
Main townBirmingham
Planning regimeEngland: TCPA 1990 and the 2007 Advertisement Regulations
Building approvalBuilding Regulations (Approved Documents)
SurveyFree for new work, from our Great Barr base

Questions about timber shopfronts in the West Midlands

Do you make timber shopfronts for premises in the West Midlands?

Yes. Each front is drawn and made to a measured survey, and we travel from Great Barr to fit it, with one named contact throughout.

Which timber suits the weather in the West Midlands?

Exposure matters more than the place name. A sheltered street can take most durable hardwoods, while a front facing open weather does better with a very stable timber and a stronger paint system.

How far ahead should we plan a timber front in the West Midlands?

Allow typically 4 to 8 weeks for making after sign-off, then around a week on site. A winter fit needs extra margin for paint drying.

Do roller shutters need planning permission in the West Midlands area?

Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.

Does the Equality Act apply to a shop entrance in the West Midlands area?

Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.

Planning timber shopfronts in the West Midlands?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price