Across the West Midlands, timber is the material we suggest when a building has proportions worth respecting. For Aldridge premises, we set the stallriser, pilasters and fascia from the elevation above, then detail the joinery to match.
Measuring the opening is the easy part of a survey in Aldridge. We also look at the beam above, the pavement fall and any meters or drains nearby.

What makes timber shopfronts work well on Aldridge premises?
If your Aldridge premises have a deep recessed entrance, timber can make it feel like a welcome. We'd panel the returns, add a lit soffit and lay a hard-wearing threshold, keeping the end grain of every post clear of the wet.
A brand rollout can include timber, as long as the details repeat. For a branch in Aldridge we'd use the same mouldings, colours and sign panel as your other sites, adjusting only the widths and heights to fit the opening.
If the pavement falls across your frontage, let the stallriser take up the slope and keep the glass line dead level. The eye reads the long horizontal, so Aldridge premises on a slope look settled once that line is true.
How much should you set aside for timber shopfronts in Aldridge?
Until the survey is done, plan on £3,995 to £13,995 plus VAT for a typical frontage. Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.
Could timber shopfronts in Aldridge need planning permission?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for timber shopfronts at premises in the Aldridge area: a planning application, or work that doesn't materially affect the external appearance.
We confirm the position at survey, because a boundary or a special designation can change who handles the file, but applications from Aldridge premises normally go to Walsall Metropolitan Borough Council.
| Town | Aldridge |
|---|---|
| Area | West Midlands |
| Postcode districts | WS9 |
| Planning authority | Walsall Metropolitan Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 4 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Aldridge
Do you make the joinery for Aldridge shops to order?
Yes. Every length is made to the signed-off drawings for your opening, then brought to Aldridge from Great Barr by vetted teams working under S&K Glazing.
What should I budget for looking after a timber front in Aldridge?
A repaint every 5 to 7 years, plus a yearly wash and touch-up of the cills. Door gear needs checking too, since seasonal movement can throw a door out of line.
Will timber suffer on my Aldridge frontage if it gets a lot of rain?
Not if the details are right. Sloped cills, sealed end grain and plinth blocks keep water moving, and the paint system then only has to deal with the weather, not trapped damp.
What rules apply to a fire exit door through a shopfront in the Aldridge area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Does the Equality Act apply to a shop entrance in the Aldridge area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.