Underneath a later fascia on your Aldridge premises, there may be more of the old front than you think. Our survey looks for the brackets, cornices and ghost lines that show how it once looked.
Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

What makes heritage shopfronts work well on Aldridge premises?
Old joinery doesn't suit rushed night work, though parts of the job do. At Aldridge premises that can't close, we'd carry out noisy removal and glazing out of hours, and leave careful repairs and painting for the day behind a dust screen.
Period corner shops often had a canted entrance or a curved pane. If yours did, the floor and ceiling at your Aldridge premises may still show its line, and we'd look for those marks before redesigning the corner.
If your Aldridge unit sits in a Victorian parade, the old pilasters usually set the rhythm, so a new front should land on them and not run past them. Keep that line and even a modern frame looks as though it belongs.
How much should you set aside for heritage shopfronts in Aldridge?
We would budget £8,495 to £24,995 plus VAT for a typical frontage. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
Could heritage shopfronts in Aldridge need planning permission?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for heritage shopfronts at premises in the Aldridge area: a planning application, or work that doesn't materially affect the external appearance.
For Aldridge, the usual route for planning and advert applications is through Walsall Metropolitan Borough Council, and we confirm that when we visit.
| Town | Aldridge |
|---|---|
| Area | West Midlands |
| Postcode districts | WS9 |
| Planning authority | Walsall Metropolitan Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 4 miles |
| Survey | Free for new work |
Questions about heritage shopfronts in Aldridge
Can you find the colour my Aldridge shopfront used to be?
Often. Scraping back through the paint layers shows earlier colours, and a specialist can analyse them if the detail matters.
What does a period survey of my Aldridge shop involve?
We measure the front, photograph every detail and check the condition of timber, paint and glass. With your agreement, we may lift a small piece of later boarding to see what survives behind it.
Who makes the joinery for Aldridge premises?
Specialist joiners vetted by us and working under S&K Glazing make and fit it. You deal with one named contact, and the contract is with S&K Glazing Limited.
Does the Equality Act apply to a shop entrance in the Aldridge area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.
What rules apply to a fire exit door through a shopfront in the Aldridge area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.