Fascia signs for Aldridge premises start with the building, because the frontage has already set the depth and position of the sign band. We measure it, draw your name to scale and show you the result before anything is cut.
Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

How would we approach fascia signage for your Aldridge premises?
If the wall above your Aldridge shop is brick or stone, letters fixed straight to it may look better than a panel. We check the surface first, since soft brick needs a different fixing from hard stone.
A deep fascia above a low shopfront can often be reduced on the drawing board. If your Aldridge premises have one, we would show you a slimmer panel option, with the ceiling line behind it adjusted to suit.
If the pavement falls across your frontage, let the stallriser take up the slope and keep the glass line dead level. The eye reads the long horizontal, so Aldridge premises on a slope look settled once that line is true.
What consents could affect fascia signage in Aldridge?
For fascia signage at premises in the Aldridge area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
In England, signs at premises in the Aldridge area come under the 2007 Advertisement Regulations. An unlit fascia sign generally needs no application under Class 5 of Schedule 3 if it sits on a wall containing a shop window, tops out at 4.6m or the first-floor sill if that is lower, and keeps letters to 0.75m high. Displaying a sign without the consent it needs is a criminal offence, so check before it goes up.
Planning and advert applications for Aldridge premises normally go to Walsall Metropolitan Borough Council. We check the position for your address at survey.
What should you budget for fascia signage in Aldridge?
We would budget £395 to £1,995 plus VAT per sign. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
| Town | Aldridge |
|---|---|
| Area | West Midlands |
| Postcode districts | WS9 |
| Planning authority | Walsall Metropolitan Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 4 miles |
| Survey | Free for new work |
Questions about fascia signage in Aldridge
Will you remove the old sign from my Aldridge premises?
Yes. Taking down the old sign, clearing old fixings and making good are included in the itemised quotation. We tell you what we find behind it before going further.
What if the fascia behind my old sign in Aldridge is rotten?
We show you photographs and price the repair before going further. A short section of timber can often be spliced in, while a badly decayed fascia is better replaced with a new subframe.
What artwork do you need for a sign in Aldridge?
Vector files such as AI, EPS or PDF are ideal, along with any brand guidelines. If you only have a low-resolution logo, it can be redrawn, and that time is shown on the quotation.
Do roller shutters need planning permission in the Aldridge area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.
Does a new shopfront in the Aldridge area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.