Opening premises in Caernarfon usually means a new fascia with a date attached. Manufacture typically takes 2 to 4 weeks from approved artwork, and fitting can be arranged around your opening plans.
We measure your Caernarfon opening in person, at a time agreed with you first, so the visit fits around your trading.

What goes into getting fascia signage right in Caernarfon?
On a corner plot, the sign has to turn the corner cleanly. We set letter size and panel joints so the name reads from both streets, with the return falling at a natural break.
If your Caernarfon unit sits in a parade of similar shops, we would look at the fascia line on either side before setting your sign height. Holding that line usually looks more confident than trying to outgrow it.
Where a fascia has crept down over the years, lifting it back to its original line can add real height to the glass. Check what sits behind it first at Caernarfon premises, since a shutter box or old beam may set the limit.
Which applications might fascia signage in Caernarfon involve?
Going by Part 42 of the 1995 Order as inserted in 2014, Wales has no permitted development route for changing a shopfront. The right covers A1 and A2 premises, but it excludes creating, altering or replacing a shopfront, or fitting or replacing a security grill or shutter on one, and it doesn't apply on Article 1(5) land. For fascia signage at premises in the Caernarfon area, that leaves a planning application, or work that leaves the appearance materially unchanged.
Class 4B in Wales limits a lit projecting sign to 0.75m², 1m high and a 1m projection. A sign beyond those figures at premises in the Caernarfon area needs advertisement consent, and the same goes for a lit sign in a conservation area.
Planning and advert applications for Caernarfon premises normally go to Cyngor Gwynedd. We check the position for your address at survey.
How much could fascia signage in Caernarfon cost you?
A sensible starting budget is £395 to £1,995 plus VAT per sign. What shifts the figure is whatever can't be seen yet, such as the condition behind the old frontage or the services running through it.
| Town | Caernarfon |
|---|---|
| Area | Gwynedd and Anglesey |
| Postcode districts | LL55, LL61 |
| Planning authority | Cyngor Gwynedd |
| Building approval | Building Regulations (Approved Documents for Wales) |
| Distance from Great Barr | About 107 miles |
| Survey | Free for new work |
Questions about fascia signage in Caernarfon
Can a sign match my other sites in Gwynedd and Anglesey?
Yes. Send a photograph and the drawings or brand file from an existing site, and we match the letter style, finish and colour reference. Fascia depth may differ, so the size is adjusted to keep the proportions right.
Will you remove the old sign from my Caernarfon premises?
Yes. Taking down the old sign, clearing old fixings and making good are included in the itemised quotation. We tell you what we find behind it before going further.
Can a fascia sign in Caernarfon be lit later on?
Yes, if the sign is planned for it. Built-up letters can take halo lighting when the panel and cable route are prepared at the start, which costs far less than adapting them afterwards.
When does a shop sign in the Caernarfon area need advertisement consent?
A sign needs advertisement consent when it falls outside Class 5 or Class 4B of the 1992 Advertisement Regulations, which still apply in Wales. Within Class 5, an unlit sign sits on a wall containing a shop window and tops out at 4.6m or the first-floor sill if lower. A lit sign in a conservation area needs consent, because Class 4B isn't available there.
Can a shop fire exit in the Caernarfon area use a sliding door?
No, a dedicated fire exit can't be a sliding or revolving door. In Wales, article 14(2) of the Regulatory Reform (Fire Safety) Order 2005 also says fire exit doors must open in the direction of escape and can't be locked against immediate use. The responsible person holds that duty, normally the employer or whoever controls the premises for a business, otherwise the owner.