0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Fascia signage
  4. Abergele

Fascia signage in Abergele

Survey, drawings and a written price for fascia signage in Abergele.

Good fascia signs are mostly a matter of spacing. For Abergele premises we set letter height, margins and alignment from the door and window lines below.

Bring whatever you have to the survey in Abergele: brand guidelines, lease plans, old drawings or a photo of a frontage you admire.

Deep green shop fascia with built-up metal letters above a glazed entrance

What makes fascia signage work well on Abergele premises?

A deep fascia above a low shopfront can often be reduced on the drawing board. If your Abergele premises have one, we would show you a slimmer panel option, with the ceiling line behind it adjusted to suit.

If your Abergele unit sits in a parade of similar shops, we would look at the fascia line on either side before setting your sign height. Holding that line usually looks more confident than trying to outgrow it.

If the pavement falls across your frontage, let the stallriser take up the slope and keep the glass line dead level. The eye reads the long horizontal, so Abergele premises on a slope look settled once that line is true.

Could fascia signage in Abergele need planning permission?

Section 55 of the Town and Country Planning Act 1990 sets the test in Wales: work that doesn't materially affect the external appearance isn't development. Anything that does needs planning permission, and that goes for fascia signage at premises in the Abergele area as much as for a full new frontage. The council confirms how the test applies to your site.

In Wales, adding light takes a sign out of Class 5, which allows illumination only for medical-type notices, and into Class 4B. For premises in the Abergele area, that generally means halo or character-only lighting, static, with the lowest part at least 2.5m up. Any other lighting needs advertisement consent.

Abergele applications for planning permission or advertisement consent are normally handled by Conwy County Borough Council. Our survey includes a check of the position for your address.

How much should you set aside for fascia signage in Abergele?

The guide for fascia signage is £395 to £1,995 plus VAT per sign. Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.

Abergele at a glance
TownAbergele
AreaClwyd
Postcode districtsLL22
Planning authorityConwy County Borough Council
Building approvalBuilding Regulations (Approved Documents for Wales)
Distance from Great BarrAbout 86 miles
SurveyFree for new work

Does Conwy County Borough Council publish shopfront guidance?

Yes, LDP36: Shop front design (2017). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:

  • Stallriser height should not normally exceed 20% of the overall shopfront height.
  • Fascia depth is restricted to the depth of the console, or one-fifth of the distance from cornice to pavement where there are no consoles.
  • Illuminated box signs and vinyl or acrylic signs are not permitted in conservation areas or on historic buildings, with halo-lit or individually lit letters preferred.

Read our summary of the Conwy guidance

Questions about fascia signage in Abergele

Can a sign match my other sites in Clwyd?

Yes. Send a photograph and the drawings or brand file from an existing site, and we match the letter style, finish and colour reference. Fascia depth may differ, so the size is adjusted to keep the proportions right.

Can a fascia sign in Abergele be lit later on?

Yes, if the sign is planned for it. Built-up letters can take halo lighting when the panel and cable route are prepared at the start, which costs far less than adapting them afterwards.

How quickly can I see a drawing for my Abergele sign?

Drawings typically follow within one to two weeks of the survey, depending on the artwork and how many options you want to see. Your named contact will give you a date once the survey is booked.

Can a roller shutter go on a shop in the Abergele area without planning permission?

Usually not in Wales. Part 42 of the 1995 Order, as inserted in 2014, excludes installing or replacing a security grill or shutter on a shopfront, so the rights for shops don't help. The only way to avoid an application is work that doesn't materially affect the appearance, and the council confirms that.

Who decides listed building consent for a shopfront in the Abergele area?

Planning authorities and Welsh Ministers share control of listed building consent in Wales, under the Historic Environment (Wales) Act 2023. Cadw is the national body, and the 1990 Act no longer applies. Ask the council where an application should start.

Planning fascia signage in Abergele?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price