For fascia signage across Powys, we draw first and order later. You see a scale drawing with signed-off dimensions before anything is made, so the frontage on paper is the frontage you get.
Most frontages share something with someone, be that a door to the flats above, a meter cupboard or a pilaster on the boundary. We pick those up early on fascia signage in Powys, because they are far easier to design around than to discover on the day.

Where do you start with fascia signage in Powys?
Fascia depths rarely match from site to site. If your brand has several premises in Powys, we keep the logo proportions and spacing rules and adjust the size, so a shallow fascia near Newtown still looks related to a deep one elsewhere.
Neighbouring signs set the visual noise your name has to sit against. If the units beside your premises in Powys use bright panels, a quieter dark fascia with well-spaced letters will usually stand out more.
What consents apply to fascia signage in Powys?
Section 55 of the Town and Country Planning Act 1990 sets the test in Wales: work that doesn't materially affect the external appearance isn't development. Anything that does needs planning permission, and that goes for fascia signage at premises in the Powys area as much as for a full new frontage. The council confirms how the test applies to your site.
In Wales, adding light takes a sign out of Class 5, which allows illumination only for medical-type notices, and into Class 4B. For premises in the Powys area, that generally means halo or character-only lighting, static, with the lowest part at least 2.5m up. Any other lighting needs advertisement consent.
How much does fascia signage cost in Powys?
The guide for fascia signage is £395 to £1,995 plus VAT per sign. Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
| Area | Powys |
|---|---|
| Nation | Wales |
| Towns covered | 1 |
| Main town | Newtown |
| Planning regime | Wales: TCPA 1990 and the 1992 Advertisement Regulations |
| Building approval | Building Regulations (Approved Documents for Wales) |
| Survey | Free for new work, from our Great Barr base |
Questions about fascia signage in Powys
Do you make signs to brand guidelines for sites around Newtown?
Yes. Send the guidelines and artwork files, and we prepare a scale drawing of the sign on your elevation for approval. Any change needed for the size of the fascia is shown before anything is made.
Can a sign go up out of hours on premises around Newtown?
Yes, closed-day or out-of-hours installation can be arranged. Most fascia signs take about a day, so the shop rarely needs to close for long.
Can you replace a fascia sign in Powys without touching the shopfront?
Yes. Most signs can be changed on their own, and we check the subframe once the old panel is off. If the shopfront will be replaced within a few years, we would tell you, so the sign can be sized for it.
Does a replacement shopfront in the Powys area need Building Regulations approval?
Assume yes until building control says otherwise, because Wales has no like-for-like exemption. Glazing is judged against Approved Document N, as Wales keeps Part N. A registered installer can self-certify replacement windows and doors in non-dwellings, but not structural glass, curtain walling or revolving doors.
When does a shop sign in the Powys area need advertisement consent?
A sign needs advertisement consent when it falls outside Class 5 or Class 4B of the 1992 Advertisement Regulations, which still apply in Wales. Within Class 5, an unlit sign sits on a wall containing a shop window and tops out at 4.6m or the first-floor sill if lower. A lit sign in a conservation area needs consent, because Class 4B isn't available there.