For heritage shopfronts across Powys, we draw first and order later. You see a scale drawing with signed-off dimensions before anything is made, so the frontage on paper is the frontage you get.
What sits behind the existing fascia often decides the job. Old beams, abandoned cable runs and earlier frames are common finds, which is why our visit to Powys premises looks past the surface before anything is drawn or priced for heritage shopfronts.

What makes heritage shopfronts work well for premises in Powys?
Layers of old paint, filler and later boards build up over the years. On premises across Powys, we strip back only as far as needed and keep sound timber in place, because the original is often better wood than you can buy today.
Joinery has regional habits, and a front that looks right in one place can feel imported in another. For premises in Powys we look at nearby buildings of a similar date, then borrow their scale and moulding sizes.
What consents apply to heritage shopfronts in Powys?
Section 55 of the Town and Country Planning Act 1990 sets the test in Wales: work that doesn't materially affect the external appearance isn't development. Anything that does needs planning permission, and that goes for heritage shopfronts at premises in the Powys area as much as for a full new frontage. The council confirms how the test applies to your site.
How much do heritage shopfronts cost in Powys?
The guide for heritage shopfronts is £8,495 to £24,995 plus VAT for a typical frontage. Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
| Area | Powys |
|---|---|
| Nation | Wales |
| Towns covered | 1 |
| Main town | Newtown |
| Planning regime | Wales: TCPA 1990 and the 1992 Advertisement Regulations |
| Building approval | Building Regulations (Approved Documents for Wales) |
| Survey | Free for new work, from our Great Barr base |
Questions about heritage shopfronts in Powys
Can my old shopfront in Newtown be repaired instead of replaced?
Often, yes. Rot usually stays at the feet of posts, cills and door bottoms, and those can be cut out and spliced while the rest stays in place.
Do you work on period shopfronts across Powys?
Yes. We travel from Great Barr to survey, record and repair period fronts, bringing in joiners, sign writers and tilers vetted for this kind of work.
Can you match old glass at premises in Powys?
Often. Reclaimed or drawn glass with a slight ripple can be sourced for small panes, and leaded lights can be repaired to the same pattern.
When does a shop sign in the Powys area need advertisement consent?
A sign needs advertisement consent when it falls outside Class 5 or Class 4B of the 1992 Advertisement Regulations, which still apply in Wales. Within Class 5, an unlit sign sits on a wall containing a shop window and tops out at 4.6m or the first-floor sill if lower. A lit sign in a conservation area needs consent, because Class 4B isn't available there.
Can a roller shutter go on a shop in the Powys area without planning permission?
Usually not in Wales. Part 42 of the 1995 Order, as inserted in 2014, excludes installing or replacing a security grill or shutter on a shopfront, so the rights for shops don't help. The only way to avoid an application is work that doesn't materially affect the appearance, and the council confirms that.