New sign, new name or a fascia that has simply faded: any job in Shrewsbury begins with a measured survey and a look at what sits behind the old panel. Fixings are only as good as the structure they land in.
Bring whatever you have to the survey in Shrewsbury: brand guidelines, lease plans, old drawings or a photo of a frontage you admire.

What goes into getting fascia signage right in Shrewsbury?
On a corner plot, the sign has to turn the corner cleanly. We set letter size and panel joints so the name reads from both streets, with the return falling at a natural break.
Where the fascia on your Shrewsbury premises has been overclad, we lift a sample at survey to see what is underneath. Original timber, cornice mouldings or tile may be worth keeping, and they change what the new sign should be.
Where the footway outside your Shrewsbury premises is narrow, a recessed entrance earns its keep. It gives people a dry place to pause out of the walkway, and it adds a longer run of display glass either side of the door.
Which applications might fascia signage in Shrewsbury involve?
For fascia signage at premises in the Shrewsbury area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
Lighting moves a sign out of Class 5 in England, because that class allows illumination only for medical-type notices. Class 4B then applies at premises in the Shrewsbury area: halo or character-only lighting, static, with the lowest part at least 2.5m up. Brightness is capped at 600 cd/m² on signs up to 10m² and 300 cd/m² above that, and anything outside these limits needs advertisement consent.
At survey we check how things stand for your building, although applications for planning permission or advertisement consent here normally go to Shropshire Council.
How much could fascia signage in Shrewsbury cost you?
The guide for fascia signage is £395 to £1,995 plus VAT per sign. Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
| Town | Shrewsbury |
|---|---|
| Area | Shropshire |
| Postcode districts | SY1, SY2, SY3 |
| Planning authority | Shropshire Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 37 miles |
| Survey | Free for new work |
Questions about fascia signage in Shrewsbury
What artwork do you need for a sign in Shrewsbury?
Vector files such as AI, EPS or PDF are ideal, along with any brand guidelines. If you only have a low-resolution logo, it can be redrawn, and that time is shown on the quotation.
Can a fascia sign in Shrewsbury be lit later on?
Yes, if the sign is planned for it. Built-up letters can take halo lighting when the panel and cable route are prepared at the start, which costs far less than adapting them afterwards.
Can a new fascia sign in Shrewsbury be fitted on a closed day?
Yes, we can arrange that, or fit out of hours if that suits you better. Most fascia signs take about a day, so the work can often go into your quietest trading hours.
Does the Equality Act apply to a shop entrance in the Shrewsbury area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.
Does a new shopfront in the Shrewsbury area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.