A heritage shopfront in Shrewsbury starts with what survives on the building, however little that seems. We record it, draw it and design any new work from that evidence.
Bring whatever you have to the survey in Shrewsbury: brand guidelines, lease plans, old drawings or a photo of a frontage you admire.

What should you think about before commissioning heritage shopfronts in Shrewsbury?
Period corner shops often had a canted entrance or a curved pane. If yours did, the floor and ceiling at your Shrewsbury premises may still show its line, and we'd look for those marks before redesigning the corner.
Old joinery doesn't suit rushed night work, though parts of the job do. At Shrewsbury premises that can't close, we'd carry out noisy removal and glazing out of hours, and leave careful repairs and painting for the day behind a dust screen.
On a north-facing frontage the glass stays free of glare, but the interior can look dim from the street, so lighting needs to sit closer to the window. If your Shrewsbury premises face south, the problem flips to reflections by day and fading stock.
Who approves heritage shopfronts in Shrewsbury?
For heritage shopfronts at premises in the Shrewsbury area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
We confirm the position at survey, because a boundary or a special designation can change who handles the file, but applications from Shrewsbury premises normally go to Shropshire Council.
What is a realistic budget for heritage shopfronts in Shrewsbury?
Until the survey is done, plan on £8,495 to £24,995 plus VAT for a typical frontage. Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.
| Town | Shrewsbury |
|---|---|
| Area | Shropshire |
| Postcode districts | SY1, SY2, SY3 |
| Planning authority | Shropshire Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 37 miles |
| Survey | Free for new work |
Questions about heritage shopfronts in Shrewsbury
Can I still have good security on a period front in Shrewsbury?
Yes. An internal shutter, laminated glass where the frame can carry it and discreet alarm contacts protect the shop without changing how it looks from the street.
Who makes the joinery for Shrewsbury premises?
Specialist joiners vetted by us and working under S&K Glazing make and fit it. You deal with one named contact, and the contract is with S&K Glazing Limited.
How much of my Shrewsbury shopfront can be kept?
Usually more than it first appears. Decay tends to stay low on posts and doors, while the upper joinery is often sound and can stay.
What rules apply to a fire exit door through a shopfront in the Shrewsbury area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Does a new shopfront in the Shrewsbury area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.