0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Fascia signage
  4. Sunbury-on-Thames

Fascia signage in Sunbury-on-Thames

Scale drawings for fascia signage in Sunbury-on-Thames before anything is made.

Your name over the door is the first thing anyone reads, often from across the road. For shopfronts in Sunbury-on-Thames we size the lettering for that distance and keep a proper margin around it.

Your survey is where the price gets real, because widths, heights, levels and access are all taken on site in Sunbury-on-Thames.

Deep green shop fascia with built-up metal letters above a glazed entrance

How do you design around the building when planning fascia signage in Sunbury-on-Thames?

A deep fascia above a low shopfront can often be reduced on the drawing board. If your Sunbury-on-Thames premises have one, we would show you a slimmer panel option, with the ceiling line behind it adjusted to suit.

Where a shutter box sits above the window, the sign has to be designed around it. We either house the box behind the fascia or adjust the panel, so nothing sits awkwardly proud of the frontage.

If your premises were once two shops, decide early whether the front should read as one or as two. One continuous fascia with a repeated bay width usually settles the elevation better than two mismatched halves, which is worth testing on any Sunbury-on-Thames unit of that kind.

What might fascia signage cost in Sunbury-on-Thames?

Until the survey is done, plan on £395 to £1,995 plus VAT per sign. Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.

What permissions should you check for fascia signage in Sunbury-on-Thames?

England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for fascia signage at premises in the Sunbury-on-Thames area: a planning application, or work that doesn't materially affect the external appearance.

Class 4B, England's class for lit signs, isn't available in conservation areas, Areas of Outstanding Natural Beauty, National Parks or the Broads, so a lit sign there normally needs advertisement consent. In an area of special control it is unavailable too, and Class 5 drops to a 3.6m top height, 0.3m letters and one-tenth of the building face up to 3.6m. Ask the council which designations cover premises in the Sunbury-on-Thames area.

Sunbury-on-Thames applications for planning permission or advertisement consent are normally handled by Spelthorne Borough Council. Our survey includes a check of the position for your address.

Sunbury-on-Thames at a glance
TownSunbury-on-Thames
AreaSurrey
Postcode districtsKT12, TW15, TW16, TW17
Planning authoritySpelthorne Borough Council
Building approvalBuilding Regulations (Approved Documents)
Distance from Great BarrAbout 101 miles
SurveyFree for new work

Questions about fascia signage in Sunbury-on-Thames

Can a new fascia sign in Sunbury-on-Thames be fitted on a closed day?

Yes, we can arrange that, or fit out of hours if that suits you better. Most fascia signs take about a day, so the work can often go into your quietest trading hours.

What if the fascia behind my old sign in Sunbury-on-Thames is rotten?

We show you photographs and price the repair before going further. A short section of timber can often be spliced in, while a badly decayed fascia is better replaced with a new subframe.

What artwork do you need for a sign in Sunbury-on-Thames?

Vector files such as AI, EPS or PDF are ideal, along with any brand guidelines. If you only have a low-resolution logo, it can be redrawn, and that time is shown on the quotation.

Do I need planning permission to change a shopfront in the Sunbury-on-Thames area?

Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.

Do roller shutters need planning permission in the Sunbury-on-Thames area?

Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.

Planning fascia signage in Sunbury-on-Thames?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price