If your Harlesden building deserves better than the front it has, a recreated period shopfront could be the answer. We work from surviving fabric, old photographs and the proportions of the elevation above.
Nothing gets ordered off the back of a survey in Harlesden, because its job is to give us the numbers to draw and price from.

How do you design around the building when planning heritage shopfronts in Harlesden?
A landlord may own the building while you hold the lease, and each can see old fabric differently. For Harlesden premises we'd prepare a plain record of what's there and what we propose, so both sides can agree before work starts.
A narrow period front relies on fine detail. For a slim Harlesden unit we'd keep the bars thin and the mouldings small, because anything oversized on a small front looks like a later addition.
Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Harlesden premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.
What permissions should you check for heritage shopfronts in Harlesden?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for heritage shopfronts at premises in the Harlesden area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
At survey we check how things stand for your building, although applications for planning permission or advertisement consent here normally go to London Borough of Brent.
What might heritage shopfronts cost in Harlesden?
Our guide band is £8,495 to £24,995 plus VAT for a typical frontage. Scope is the biggest lever, so a tighter brief for heritage shopfronts brings the figure down faster than any change of detail.
| Town | Harlesden |
|---|---|
| Area | Greater London |
| Postcode districts | HA9, NW10, NW2, W10 |
| Planning authority | London Borough of Brent |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 99 miles |
| Survey | Free for new work |
Does Brent Council publish shopfront guidance?
Yes, Shopfronts SPD3 (2018). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- A stallriser of at least 300mm should be kept or installed at the base of the shop display.
- Fascia text should cover no more than half the fascia's width and height, with lettering no taller than 30cm.
- Solid or pin-hole roller shutters are discouraged, and security options run from laminated glass to internal open shutters, then external open shutters only where needed for insurance.
Questions about heritage shopfronts in Harlesden
Who makes the joinery for Harlesden premises?
Specialist joiners vetted by us and working under S&K Glazing make and fit it. You deal with one named contact, and the contract is with S&K Glazing Limited.
Can I still have good security on a period front in Harlesden?
Yes. An internal shutter, laminated glass where the frame can carry it and discreet alarm contacts protect the shop without changing how it looks from the street.
Which old features would you always try to save in Greater London?
Tiled stallrisers, mosaic thresholds, console brackets, ironwork and leaded top lights, wherever they survive. These are the details that are hardest to recreate convincingly.
Does a new shopfront in the Harlesden area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.
What rules apply to a fire exit door through a shopfront in the Harlesden area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.