Restoring an old front in Portadown means keeping the character and solving the modern problems. Door gear, lighting, security and cleaning all have to work without showing from the street.
A survey in Portadown usually starts outside, looking at the whole elevation before any tape comes out, because the frontage has to answer the building above it.

What goes into getting heritage shopfronts right in Portadown?
Period corner shops often had a canted entrance or a curved pane. If yours did, the floor and ceiling at your Portadown premises may still show its line, and we'd look for those marks before redesigning the corner.
Old joinery doesn't suit rushed night work, though parts of the job do. At Portadown premises that can't close, we'd carry out noisy removal and glazing out of hours, and leave careful repairs and painting for the day behind a dust screen.
If you trade after dark in Portadown, the view in matters more than the sign. A warm, evenly lit interior with light on the back wall will usually do more than a brighter fascia, because it gives the eye somewhere to go.
How much could heritage shopfronts in Portadown cost you?
We would budget £8,495 to £24,995 plus VAT for a typical frontage. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
Which applications might heritage shopfronts in Portadown involve?
Section 23 of the Planning Act (Northern Ireland) 2011 sets the test: work that doesn't materially affect the external appearance isn't development. That makes appearance the deciding point for heritage shopfronts at premises in the Portadown area, so planning permission is needed if it is materially affected and usually not for a true like-for-like replacement. The council confirms the position for the particular premises.
Expect planning and advert applications here to go to Armagh City, Banbridge and Craigavon Borough Council in the normal way. We check what that means for your building when we survey it in Portadown.
| Town | Portadown |
|---|---|
| Area | County Armagh |
| Postcode districts | BT62 |
| Planning authority | Armagh City, Banbridge and Craigavon Borough Council |
| Building approval | Building Control (Technical Booklets) |
| Survey | Free for new work |
Questions about heritage shopfronts in Portadown
How much of my Portadown shopfront can be kept?
Usually more than it first appears. Decay tends to stay low on posts and doors, while the upper joinery is often sound and can stay.
How long will restoration take at my Portadown premises?
New joinery typically takes 8 to 14 weeks to make, then 1 to 3 weeks on site. The survey gives you a realistic programme, because repair-only jobs can take far less.
Can a new sign go on my old Portadown shopfront?
Yes, and traditional sign writing often looks right on a painted fascia. We'd draw the lettering to suit the fascia, then fix anything raised so it does no harm to the original timber.
What rules apply to a fire exit door through a shopfront in the Portadown area?
It must open in the direction of escape, it can't be locked against immediate use, and a dedicated fire exit can't be sliding or revolving. In Northern Ireland that comes from regulation 13(2) of the Fire Safety Regulations (Northern Ireland) 2010, and duties sit with dutyholders, meaning the employer and any person with control of the premises, whom the Fire and Rescue Service calls the appropriate person. An outward door may also need Department consent under Article 56 of the Roads (Northern Ireland) Order 1993.
Do roller shutters need planning permission in the Portadown area?
Usually yes, when they materially affect the external appearance. No permitted development route for shutters appears in Northern Ireland's 2015 Order, so treat them as falling to the appearance test. Check with the council before ordering.