Your brand and your building both have a say in a new frontage. On premises in Portadown we start with what the structure allows, then bring in the name, colours and materials.
Surveys for Portadown are booked with you directly. Tell us your quieter days and we'll work around them.

What should you think about before commissioning shopfront design in Portadown?
Should several trades be involved in your fit-out, we coordinate the frontage with the shopfitter's drawings. Ceiling lines, display depths and shutter boxes then agree with each other before work starts.
Where the building above has strong vertical lines, we carry them down through pilasters and mullions. If it is plain, the shopfront can take a calmer, wider treatment.
Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Portadown premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.
What is a realistic budget for shopfront design in Portadown?
Until the survey is done, plan on £495 to £2,495 plus VAT per frontage. Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.
Who approves shopfront design in Portadown?
A true like-for-like replacement usually needs no planning permission in Northern Ireland, since the external appearance isn't materially affected. Altered materials, proportions or sightlines usually do count, so for shopfront work at premises in the Portadown area, planning permission is then likely to be needed. The council confirms where a job sits.
We confirm the position at survey, because a boundary or a special designation can change who handles the file, but applications from Portadown premises normally go to Armagh City, Banbridge and Craigavon Borough Council.
| Town | Portadown |
|---|---|
| Area | County Armagh |
| Postcode districts | BT62 |
| Planning authority | Armagh City, Banbridge and Craigavon Borough Council |
| Building approval | Building Control (Technical Booklets) |
| Survey | Free for new work |
Questions about shopfront design in Portadown
What do you need from me before designing for my Portadown premises?
The address, brand files and a few frontages you admire are a good start. Tell us your rough budget too, because it helps us focus on what can be built.
Do I need a design service for a simple Portadown shopfront?
Not always. Every job gets a measured survey and scale drawings anyway. The design service adds options, visuals and a full specification, which pay off when the look matters most.
Can the work on my Portadown frontage be designed in phases?
Yes. We can draw the complete frontage first, then split it into stages, so a new sign and paint now will still suit a new shopfront later.
What rules apply to a fire exit door through a shopfront in the Portadown area?
It must open in the direction of escape, it can't be locked against immediate use, and a dedicated fire exit can't be sliding or revolving. In Northern Ireland that comes from regulation 13(2) of the Fire Safety Regulations (Northern Ireland) 2010, and duties sit with dutyholders, meaning the employer and any person with control of the premises, whom the Fire and Rescue Service calls the appropriate person. An outward door may also need Department consent under Article 56 of the Roads (Northern Ireland) Order 1993.
Does the Disability Discrimination Act apply to a shop entrance in the Portadown area?
Yes. The Disability Discrimination Act 1995 applies in Northern Ireland, and section 21 deals with physical features that make a service hard for disabled people to use. Regulations made in 2007 (SR 2007/473) add detail on features, third-party consent and design standards.