Restaurants, salons and boutiques each ask something different of a frontage. We design around how people will use your Newry premises, from the door to the display.
Bring whatever you have to the survey in Newry: brand guidelines, lease plans, old drawings or a photo of a frontage you admire.

What goes into getting shopfront design right in Newry?
For a corner unit in Newry, we design both elevations as one. The return, the door position and the sign all depend on which street brings your customers.
Where an existing shopfront has good bones, the design may keep the frame and change only the glass, fascia and colour. We would show that option next to a new frontage, with the cost of each.
Where a fascia has crept down over the years, lifting it back to its original line can add real height to the glass. Check what sits behind it first at Newry premises, since a shutter box or old beam may set the limit.
Which applications might shopfront design in Newry involve?
A true like-for-like replacement usually needs no planning permission in Northern Ireland, since the external appearance isn't materially affected. Altered materials, proportions or sightlines usually do count, so for shopfront work at premises in the Newry area, planning permission is then likely to be needed. The council confirms where a job sits.
Newry applications for planning permission or advertisement consent are normally handled by Newry, Mourne and Down District Council. Our survey includes a check of the position for your address.
How much could shopfront design in Newry cost you?
Until the survey is done, plan on £495 to £2,495 plus VAT per frontage. Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.
| Town | Newry |
|---|---|
| Area | County Down |
| Postcode districts | BT35 |
| Planning authority | Newry, Mourne and Down District Council |
| Building approval | Building Control (Technical Booklets) |
| Survey | Free for new work |
Does Newry, Mourne and Down District Council publish shopfront guidance?
Yes, Advice Guide 8 - General Principles of Good Shop Front Design. It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- Stall risers should be at least 500mm high, or reach the top of the pilaster base, with a moulded projecting sill below the glazing.
- Ground-floor fascias should be about 600mm high, and acrylic or fluorescent materials are not acceptable.
- Surface-mounted shutters will not receive planning permission, and unpainted galvanised shutters will not be permitted.
Questions about shopfront design in Newry
What do you need from me before designing for my Newry premises?
The address, brand files and a few frontages you admire are a good start. Tell us your rough budget too, because it helps us focus on what can be built.
Will you work with my shopfitter or architect in Newry?
Yes. We share drawings and coordinate the frontage with their ceiling, lighting and display plans. Your named contact stays the route for questions on the frontage.
Can a design for Newry premises follow my brand guidelines?
Yes. Send them over with your logo files, and we apply them to your elevation. Where a rule does not fit the building, we explain why and suggest an adjustment.
Who decides listed building consent for a shopfront in the Newry area?
The council decides, under section 85 of the Planning Act (Northern Ireland) 2011. The Department for Communities' Historic Environment Division is a statutory consultee on applications. Unauthorised works are a criminal offence, so ask before anything is removed.
Do roller shutters need planning permission in the Newry area?
Usually yes, when they materially affect the external appearance. No permitted development route for shutters appears in Northern Ireland's 2015 Order, so treat them as falling to the appearance test. Check with the council before ordering.