Underneath a later fascia on your Skegness premises, there may be more of the old front than you think. Our survey looks for the brackets, cornices and ghost lines that show how it once looked.
A survey in Skegness usually starts outside, looking at the whole elevation before any tape comes out, because the frontage has to answer the building above it.

Where should you begin with heritage shopfronts in Skegness?
Period corner shops often had a canted entrance or a curved pane. If yours did, the floor and ceiling at your Skegness premises may still show its line, and we'd look for those marks before redesigning the corner.
Deep recessed lobbies are among the first things to go in a refit. If your Skegness premises still have one, especially with a tiled floor, we'd protect it, repair the floor and reuse the returns as display.
If your Skegness unit is narrow, a central door can split a small window into two weak ones. Moving the door to one side gives you a single confident pane, provided the layout inside still works.
What price should you expect for heritage shopfronts in Skegness?
As a working budget, use £8,495 to £24,995 plus VAT for a typical frontage. Your place inside that range for heritage shopfronts depends mostly on how much of the existing frontage can stay and how much has to be put right first.
What sign-off might you need for heritage shopfronts in Skegness?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for heritage shopfronts at premises in the Skegness area: a planning application, or work that doesn't materially affect the external appearance.
For Skegness, the usual route for planning and advert applications is through East Lindsey District Council, and we confirm that when we visit.
| Town | Skegness |
|---|---|
| Area | Lincolnshire |
| Postcode districts | PE25 |
| Planning authority | East Lindsey District Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 102 miles |
| Survey | Free for new work |
Questions about heritage shopfronts in Skegness
Can a new sign go on my old Skegness shopfront?
Yes, and traditional sign writing often looks right on a painted fascia. We'd draw the lettering to suit the fascia, then fix anything raised so it does no harm to the original timber.
How much of my Skegness shopfront can be kept?
Usually more than it first appears. Decay tends to stay low on posts and doors, while the upper joinery is often sound and can stay.
Who makes the joinery for Skegness premises?
Specialist joiners vetted by us and working under S&K Glazing make and fit it. You deal with one named contact, and the contract is with S&K Glazing Limited.
What rules apply to a fire exit door through a shopfront in the Skegness area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do I need listed building consent for a shopfront in the Skegness area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.