Underneath a later fascia on your Wrexham premises, there may be more of the old front than you think. Our survey looks for the brackets, cornices and ghost lines that show how it once looked.
It helps if you can be there when we visit Wrexham, since five minutes walking the frontage together answers more than a long email.

How do you design around the building when planning heritage shopfronts in Wrexham?
A landlord may own the building while you hold the lease, and each can see old fabric differently. For Wrexham premises we'd prepare a plain record of what's there and what we propose, so both sides can agree before work starts.
Old joinery doesn't suit rushed night work, though parts of the job do. At Wrexham premises that can't close, we'd carry out noisy removal and glazing out of hours, and leave careful repairs and painting for the day behind a dust screen.
On a north-facing frontage the glass stays free of glare, but the interior can look dim from the street, so lighting needs to sit closer to the window. If your Wrexham premises face south, the problem flips to reflections by day and fading stock.
What permissions should you check for heritage shopfronts in Wrexham?
Section 55 of the Town and Country Planning Act 1990 sets the test in Wales: work that doesn't materially affect the external appearance isn't development. Anything that does needs planning permission, and that goes for heritage shopfronts at premises in the Wrexham area as much as for a full new frontage. The council confirms how the test applies to your site.
Planning and advert applications for Wrexham premises normally go to Wrexham County Borough Council. We check the position for your address at survey.
What might heritage shopfronts cost in Wrexham?
As a working budget, use £8,495 to £24,995 plus VAT for a typical frontage. Your place inside that range for heritage shopfronts depends mostly on how much of the existing frontage can stay and how much has to be put right first.
| Town | Wrexham |
|---|---|
| Area | Clwyd |
| Postcode districts | LL11, LL12, LL13 |
| Planning authority | Wrexham County Borough Council |
| Building approval | Building Regulations (Approved Documents for Wales) |
| Distance from Great Barr | About 57 miles |
| Survey | Free for new work |
Questions about heritage shopfronts in Wrexham
Can you find the colour my Wrexham shopfront used to be?
Often. Scraping back through the paint layers shows earlier colours, and a specialist can analyse them if the detail matters.
Can I still have good security on a period front in Wrexham?
Yes. An internal shutter, laminated glass where the frame can carry it and discreet alarm contacts protect the shop without changing how it looks from the street.
What does a period survey of my Wrexham shop involve?
We measure the front, photograph every detail and check the condition of timber, paint and glass. With your agreement, we may lift a small piece of later boarding to see what survives behind it.
Can a roller shutter go on a shop in the Wrexham area without planning permission?
Usually not in Wales. Part 42 of the 1995 Order, as inserted in 2014, excludes installing or replacing a security grill or shutter on a shopfront, so the rights for shops don't help. The only way to avoid an application is work that doesn't materially affect the appearance, and the council confirms that.
Does a replacement shopfront in the Wrexham area need Building Regulations approval?
Assume yes until building control says otherwise, because Wales has no like-for-like exemption. Glazing is judged against Approved Document N, as Wales keeps Part N. A registered installer can self-certify replacement windows and doors in non-dwellings, but not structural glass, curtain walling or revolving doors.