Design, manufacture, wiring and fitting all sit under one contract for lit signs across Stockton-on-Tees and County Durham. Your named contact handles the job from measured survey to first switch-on.
Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

Where should you begin with illuminated signage in Stockton-on-Tees?
If letters will sit close to a window head or canopy, we check how the light falls across it. A small change in stand-off or letter position can prevent a hard shadow line.
On a timber frontage, a slim trough light usually keeps more of the daytime character than lit letters. We colour-match the bar to the fascia, so it almost disappears by day.
If there are storeys above the shop, the frontage should feel like the base of the building and not a sign stuck on it. Lining up mullions with the windows overhead is a small move that settles the whole elevation at Stockton-on-Tees premises.
What price should you expect for illuminated signage in Stockton-on-Tees?
A sensible starting budget is £895 to £3,995 plus VAT per sign. What shifts the figure is whatever can't be seen yet, such as the condition behind the old frontage or the services running through it.
What sign-off might you need for illuminated signage in Stockton-on-Tees?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for illuminated signage at premises in the Stockton-on-Tees area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
A lit projecting sign at premises in the Stockton-on-Tees area has firm limits under Class 4B in England: 0.75m² per surface and 1m high. It can project 1m, or two-thirds of the footway if that is less, and it can't sit over the carriageway. A larger sign needs advertisement consent, and so does a lit one in a conservation area.
Planning and advert applications for Stockton-on-Tees premises normally go to Stockton-on-Tees Borough Council. We check the position for your address at survey.
| Town | Stockton-on-Tees |
|---|---|
| Area | County Durham |
| Postcode districts | TS17, TS18, TS19, TS20 |
| Planning authority | Stockton-on-Tees Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 142 miles |
| Survey | Free for new work |
Questions about illuminated signage in Stockton-on-Tees
Can the sign in Stockton-on-Tees be switched off at night?
Yes. A timer, photocell or simple switch can be built in, and many premises set the sign to go off shortly after closing or late in the evening.
Can you replace a lightbox on my Stockton-on-Tees premises?
Yes. We take the old box down, check the wall and supply behind it, then fit the new sign. Built-up letters will often need a new panel, because the old box leaves a mark on the fascia.
Do you supply lit signs for premises across County Durham?
Yes. We travel from Great Barr, with vetted teams working under S&K Glazing and one named contact for the job. The same scale drawing and sign-off process applies wherever your premises are.
What rules apply to a fire exit door through a shopfront in the Stockton-on-Tees area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do I need listed building consent for a shopfront in the Stockton-on-Tees area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.