Shutters across Christchurch and Dorset are supplied under one contract with any glazing or signs on the same frontage. That way the box, the fascia and the glass are all designed as one job.
Surveys for Christchurch are booked with you directly. Tell us your quieter days and we'll work around them.

What makes perforated roller shutters work well on Christchurch premises?
If your Christchurch unit has an old external shutter, we check whether the box can come off and leave a clean fascia. That single change can lift a frontage more than a new sign.
If the shutter has to run past a door or a side window, we check how the curtain lands on the threshold. A neat bottom rail and floor lock keep the entrance flush when the shutter is up.
If your premises were once two shops, decide early whether the front should read as one or as two. One continuous fascia with a repeated bay width usually settles the elevation better than two mismatched halves, which is worth testing on any Christchurch unit of that kind.
Could perforated roller shutters in Christchurch need planning permission?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for perforated roller shutters at premises in the Christchurch area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
At survey we check how things stand for your building, although applications for planning permission or advertisement consent here normally go to Bournemouth, Christchurch and Poole Council.
How much should you set aside for perforated roller shutters in Christchurch?
Until the survey is done, plan on £1,695 to £4,495 plus VAT per shutter. Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.
| Town | Christchurch |
|---|---|
| Area | Dorset |
| Postcode districts | BH23, BH5, BH6, BH7 |
| Planning authority | Bournemouth, Christchurch and Poole Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 125 miles |
| Survey | Free for new work |
Questions about perforated roller shutters in Christchurch
Can I keep my window display lit behind a shutter in Christchurch?
Yes, and we recommend it. A low-level light on a timer costs very little and lets the display read through the perforations overnight.
Can one person open the shutter at my Christchurch shop?
Yes. Powered shutters run at the turn of a key or a button press, and a manual override is available if the power fails. We show your staff both at handover.
What controls can a shutter have?
A key switch, a wall button or a remote are the usual choices, each with a manual override. Many shops use a key switch at the door, so closing up needs someone present.
Do I need listed building consent for a shopfront in the Christchurch area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.
Does a new shopfront in the Christchurch area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.