Perforated roller shutters give Dunstable premises out-of-hours protection while light and the display still show through. We look first at whether the shutter should sit inside the glass, since that often gives a better frontage.
Please have keys to any meter cupboards and shutter housings to hand when we survey in Dunstable, because what sits behind them can change the drawing.

What should you think about before commissioning perforated roller shutters in Dunstable?
If the shutter has to run past a door or a side window, we check how the curtain lands on the threshold. A neat bottom rail and floor lock keep the entrance flush when the shutter is up.
For premises that open early or trade late, shutter noise can matter to neighbours. A motor with a soft start and well-set guides runs noticeably more quietly.
Where units share one long run of fascia, breaking the height makes you stand out for the wrong reason. If that describes your Dunstable parade, keep the line and win attention with lettering, lighting and what's in the window.
Who approves perforated roller shutters in Dunstable?
For perforated roller shutters at premises in the Dunstable area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
Planning and advert applications for Dunstable premises normally go to Central Bedfordshire Council. We check the position for your address at survey.
What is a realistic budget for perforated roller shutters in Dunstable?
We would budget £1,695 to £4,495 plus VAT per shutter. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
| Town | Dunstable |
|---|---|
| Area | Bedfordshire |
| Postcode districts | LU6 |
| Planning authority | Central Bedfordshire Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 75 miles |
| Survey | Free for new work |
Questions about perforated roller shutters in Dunstable
Do you remove old shutters in Dunstable?
Yes. Taking out the old curtain, box and guides, then making good the frontage, is shown as its own line in the itemised quotation.
Can you fit an internal shutter on my Dunstable premises?
Usually, yes. We check for ceiling space, a clear path behind the window and a solid fixing for the guides. Where space is tight, a slim box or a smaller display can make it work.
How noisy is a shutter in Dunstable premises?
A modern tubular motor is fairly quiet, and a well-set curtain only makes a low rumble. Heavier steel shutters and worn guides make more noise, which matters if there are flats above.
What rules apply to a fire exit door through a shopfront in the Dunstable area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do I need planning permission to change a shopfront in the Dunstable area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.