0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Perforated roller shutters
  4. Newport

Perforated roller shutters in Newport

Measured at your Newport premises, never guessed from a photograph.

Perforated roller shutters give Newport premises out-of-hours protection while light and the display still show through. We look first at whether the shutter should sit inside the glass, since that often gives a better frontage.

It helps if you can be there when we visit Newport, since five minutes walking the frontage together answers more than a long email.

Perforated aluminium roller shutter over a lit shop display, seen from the pavement after dark

How would we approach perforated roller shutters for your Newport premises?

If the shutter has to run past a door or a side window, we check how the curtain lands on the threshold. A neat bottom rail and floor lock keep the entrance flush when the shutter is up.

If your Newport unit has an old external shutter, we check whether the box can come off and leave a clean fascia. That single change can lift a frontage more than a new sign.

If your premises were once two shops, decide early whether the front should read as one or as two. One continuous fascia with a repeated bay width usually settles the elevation better than two mismatched halves, which is worth testing on any Newport unit of that kind.

What consents could affect perforated roller shutters in Newport?

The existing rules still apply in Wales, because most of the Planning (Wales) Act 2026 is waiting for a commencement order. For perforated roller shutters at premises in the Newport area, building work that materially affects the external appearance needs planning permission, while a true like-for-like replacement usually doesn't. The council confirms the current position.

For Newport, the usual route for planning and advert applications is through Newport City Council, and we confirm that when we visit.

What should you budget for perforated roller shutters in Newport?

Allow £1,695 to £4,495 plus VAT per shutter. Size and specification set most of that figure for perforated roller shutters, and the rest depends on what the survey finds on site.

Newport at a glance
TownNewport
AreaGwent
Postcode districtsNP10, NP18, NP19, NP20
Planning authorityNewport City Council
Building approvalBuilding Regulations (Approved Documents for Wales)
Distance from Great BarrAbout 81 miles
SurveyFree for new work

Questions about perforated roller shutters in Newport

What controls can a shutter have?

A key switch, a wall button or a remote are the usual choices, each with a manual override. Many shops use a key switch at the door, so closing up needs someone present.

Can I keep my window display lit behind a shutter in Newport?

Yes, and we recommend it. A low-level light on a timer costs very little and lets the display read through the perforations overnight.

How noisy is a shutter in Newport premises?

A modern tubular motor is fairly quiet, and a well-set curtain only makes a low rumble. Heavier steel shutters and worn guides make more noise, which matters if there are flats above.

Can a shop fire exit in the Newport area use a sliding door?

No, a dedicated fire exit can't be a sliding or revolving door. In Wales, article 14(2) of the Regulatory Reform (Fire Safety) Order 2005 also says fire exit doors must open in the direction of escape and can't be locked against immediate use. The responsible person holds that duty, normally the employer or whoever controls the premises for a business, otherwise the owner.

When does a shop sign in the Newport area need advertisement consent?

A sign needs advertisement consent when it falls outside Class 5 or Class 4B of the 1992 Advertisement Regulations, which still apply in Wales. Within Class 5, an unlit sign sits on a wall containing a shop window and tops out at 4.6m or the first-floor sill if lower. A lit sign in a conservation area needs consent, because Class 4B isn't available there.

Planning perforated roller shutters in Newport?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price