Perforated roller shutters give Wimbledon premises out-of-hours protection while light and the display still show through. We look first at whether the shutter should sit inside the glass, since that often gives a better frontage.
Please have keys to any meter cupboards and shutter housings to hand when we survey in Wimbledon, because what sits behind them can change the drawing.

What goes into getting perforated roller shutters right in Wimbledon?
For premises that open early or trade late, shutter noise can matter to neighbours. A motor with a soft start and well-set guides runs noticeably more quietly.
On premises with a recessed entrance, the shutter line needs careful thought. We usually bring it forward to the building line, or close the recess separately, so the doorway does not become a hiding place.
If there are storeys above the shop, the frontage should feel like the base of the building and not a sign stuck on it. Lining up mullions with the windows overhead is a small move that settles the whole elevation at Wimbledon premises.
How much could perforated roller shutters in Wimbledon cost you?
We would budget £1,695 to £4,495 plus VAT per shutter. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
Which applications might perforated roller shutters in Wimbledon involve?
For perforated roller shutters at premises in the Wimbledon area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
Expect planning and advert applications here to go to London Borough of Merton in the normal way. We check what that means for your building when we survey it in Wimbledon.
| Town | Wimbledon |
|---|---|
| Area | Greater London |
| Postcode districts | SW17, SW18, SW19, SW20 |
| Planning authority | London Borough of Merton |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 106 miles |
| Survey | Free for new work |
Questions about perforated roller shutters in Wimbledon
What controls can a shutter have?
A key switch, a wall button or a remote are the usual choices, each with a manual override. Many shops use a key switch at the door, so closing up needs someone present.
Can I keep my window display lit behind a shutter in Wimbledon?
Yes, and we recommend it. A low-level light on a timer costs very little and lets the display read through the perforations overnight.
Can one person open the shutter at my Wimbledon shop?
Yes. Powered shutters run at the turn of a key or a button press, and a manual override is available if the power fails. We show your staff both at handover.
Do I need listed building consent for a shopfront in the Wimbledon area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.
What rules apply to a fire exit door through a shopfront in the Wimbledon area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.