What should your premises say from across the road? We open every conversation about projecting signs in Hertfordshire with that question, then treat sightlines and proportion as seriously as the budget.
What sits behind the existing fascia often decides the job. Old beams, abandoned cable runs and earlier frames are common finds, which is why our visit to Hertfordshire premises looks past the surface before anything is drawn or priced for projecting signs.

What should you look for from projecting signs in Hertfordshire?
Exposure can change the bracket design. Where a frontage in Hertfordshire faces into the prevailing wind, a fixed blade may be a better choice than a free-swinging panel, as it has no shackles to wear.
Several businesses sharing one building need a plan. If yours sits on an upper floor in Hertfordshire, a slim projecting sign at street level may be the only thing that reaches passers-by, so we position it beside your own door.
What consents apply to projecting signs in Hertfordshire?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for projecting signs at premises in the Hertfordshire area, an application is then likely. The council confirms which side of that line a job falls on.
Lighting moves a sign out of Class 5 in England, because that class allows illumination only for medical-type notices. Class 4B then applies at premises in the Hertfordshire area: halo or character-only lighting, static, with the lowest part at least 2.5m up. Brightness is capped at 600 cd/m² on signs up to 10m² and 300 cd/m² above that, and anything outside these limits needs advertisement consent.
How much do projecting signs cost in Hertfordshire?
As a working budget, use £395 to £1,295 plus VAT per sign. Your place inside that range for projecting signs depends mostly on how much of the existing frontage can stay and how much has to be put right first.
| Area | Hertfordshire |
|---|---|
| Nation | England |
| Towns covered | 35 |
| Main town | St Albans |
| Planning regime | England: TCPA 1990 and the 2007 Advertisement Regulations |
| Building approval | Building Regulations (Approved Documents) |
| Survey | Free for new work, from our Great Barr base |
Questions about projecting signs in Hertfordshire
Can a new panel go on my existing bracket in Hertfordshire?
Often, yes, once we have checked the bracket and fixings. Old ironwork can be stripped and repainted, and the panel can be made to fit it. A loose or corroded bracket has to come down first.
What artwork works on a small hanging sign around St Albans?
Bold, simple artwork works, with a logo or a short name. Fine lettering and long strap lines get lost at an angle, so we test the design at full size.
How long does fitting take on premises in Hertfordshire?
Usually about half a day from a ladder or tower, with a little longer if a cable has to be run for lighting. The shop can normally stay open while we work.
Does the Equality Act apply to a shop entrance in the Hertfordshire area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.
Does a new shopfront in the Hertfordshire area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.