For revolving doors across Ayrshire, we draw first and order later. You see a scale drawing with signed-off dimensions before anything is made, so the frontage on paper is the frontage you get.
If you're a tenant, your landlord will probably want to see what is proposed. The scale drawings we produce for revolving doors are clear enough to send straight on, which saves a round of explaining.

Where do you start with revolving doors in Ayrshire?
A side door is part of the design. Across Ayrshire, we treat the door beside the drum as an equal, with matching finishes and the same clear approach, so nobody feels sent round the back.
Wind is usually the reason to choose a drum. For premises across Ayrshire, we look at how the entrance is exposed, because a corner that funnels weather into a lobby gains more from a revolving door than a sheltered street does.
What consents apply to revolving doors in Ayrshire?
Class 9A, Scotland's shop permitted development right, gives no route for a shopfront change. It covers Class 1A premises, but not work that alters or extends beyond the existing front, and it doesn't apply in conservation areas, National Parks or World Heritage Sites. For revolving doors at premises in the Ayrshire area, that generally means a planning application unless the external appearance isn't materially affected.
How much do revolving doors cost in Ayrshire?
The guide for revolving doors is £19,995 to £59,995 plus VAT per door. Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
| Area | Ayrshire |
|---|---|
| Nation | Scotland |
| Towns covered | 10 |
| Main town | Ayr |
| Planning regime | Scotland: 1997 Planning Act and the 1984 Advertisement Regulations |
| Building approval | Building warrant (Technical Handbook) |
| Survey | Free for new work, from our Great Barr base |
Questions about revolving doors in Ayrshire
How much notice does a revolving door need for a site in Ayrshire?
Allow 10 to 16 weeks after sign-off as a typical range, plus about a week on site. Starting early also gives the floor work time to finish.
Do you install revolving doors in Ayrshire?
Yes. We travel from Great Barr to survey the entrance, and the floor, structure and door are coordinated under one contract.
Will a revolving door cut heating bills at premises in Ayrshire?
It can, especially on an exposed entrance, because the wings stop through-draughts. The saving depends on footfall and on how the drum compares with the door you have now.
Do I need listed building consent for a shopfront in the Ayrshire area?
Almost certainly, if the building is listed and windows or doors are changing, according to Historic Environment Scotland. The planning authority decides, and Historic Environment Scotland is consulted on some applications. Scottish Ministers are notified if it objects.
Which way must a fire exit door open on a shop in the Ayrshire area?
In the direction of escape. Regulation 13(2) of the Fire Safety (Scotland) Regulations 2006 also rules out sliding and revolving doors on a dedicated fire exit and says fire exit doors can't be locked against immediate use. Duties sit with dutyholders under Part 3 of the Fire (Scotland) Act 2005, meaning the employer and any person with control of the premises.