One contract covers the frontage when you come to us for revolving doors in County Fermanagh, so glass, frame, sign and shutter aren't separate trades to chase. You also keep one named contact from first visit to handover.
Finishes behave differently at full size. Any sample we show you for revolving doors is better judged at the premises in daylight, since a colour that looks quiet on a desk can read much louder across a whole elevation.

What makes revolving doors work well for premises in County Fermanagh?
Wind is usually the reason to choose a drum. For premises across County Fermanagh, we look at how the entrance is exposed, because a corner that funnels weather into a lobby gains more from a revolving door than a sheltered street does.
A side door is part of the design. Across County Fermanagh, we treat the door beside the drum as an equal, with matching finishes and the same clear approach, so nobody feels sent round the back.
What consents apply to revolving doors in County Fermanagh?
Shutters in Northern Ireland are treated like the rest of the frontage: as no permitted development route appears to exist, they usually fall to the appearance test. Building work that materially affects the external appearance needs planning permission, for revolving doors at premises in the County Fermanagh area as for anything else on the frontage, while a true like-for-like usually doesn't. Ask the council where a particular job stands.
How much do revolving doors cost in County Fermanagh?
Our guide band is £19,995 to £59,995 plus VAT per door. Scope is the biggest lever, so a tighter brief for revolving doors brings the figure down faster than any change of detail.
| Area | County Fermanagh |
|---|---|
| Nation | Northern Ireland |
| Towns covered | 1 |
| Main town | Enniskillen |
| Planning regime | Northern Ireland: Planning Act 2011 and the 2015 Advertisement Regulations |
| Building approval | Building Control (Technical Booklets) |
| Survey | Free for new work, from our Great Barr base |
Does Fermanagh and Omagh District Council publish shopfront guidance?
Yes, Shop Front Design, Supplementary Planning Guidance. It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- Stallrisers should not exceed the pilaster base or fascia depth, whichever is less, with depths up to 600mm generally acceptable.
- Fascia depths up to 600mm are generally acceptable, one fascia should not span two buildings, and box fascia signs should be avoided.
- External solid roller shutters are not acceptable, with security glass, internal lattice shutters or demountable mesh grilles preferred.
Questions about revolving doors in County Fermanagh
Can a lobby in County Fermanagh stay open during installation?
Usually, with the side door or another entrance in use while the drum goes in. We'd agree the sequence with you before the floor work starts.
How much notice does a revolving door need for a site in County Fermanagh?
Allow 10 to 16 weeks after sign-off as a typical range, plus about a week on site. Starting early also gives the floor work time to finish.
Is my entrance in Enniskillen big enough for a revolving door?
It may be, if the frontage or lobby is generous. A 2.1m drum takes around 2.4m each way, and you'll need room for a side door as well.
Do roller shutters need planning permission in the County Fermanagh area?
Usually yes, when they materially affect the external appearance. No permitted development route for shutters appears in Northern Ireland's 2015 Order, so treat them as falling to the appearance test. Check with the council before ordering.
Does a shop sign in the County Fermanagh area need advertisement consent?
Not always. Under Northern Ireland's 2015 Regulations, an unlit sign within Class 5 generally needs no application, with a 5m top height and 0.3m letters, and neither does a lit sign within Class 4(2). That lit class isn't available in conservation areas, Areas of Outstanding Natural Beauty or National Parks, so ask first.