0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Revolving doors
  4. Hampshire

Revolving doors in Hampshire

A written, itemised price for revolving doors in Hampshire, valid for 90 days.

Seen a frontage you admire? Bring the picture to our first talk about revolving doors in Hampshire, and we will work out what makes it succeed, from fascia depth to glass line, and what that means for your building.

Openings are rarely square or level, so the survey for revolving doors records diagonals, pavement fall and head height at several points. Those few millimetres decide whether the finished front sits true against the building.

Glass revolving door with four wings and a bronze-finished canopy at a hotel entrance

How do we handle revolving doors for premises in Hampshire?

Hotels, offices and flagship stores all use a drum differently. For a lobby in Southampton or elsewhere in Hampshire, we size the compartments for the people arriving, including their luggage, so the door never becomes the slowest part of the welcome.

Getting a drum into the building takes some thought. For addresses in Hampshire, we check how the curved panels and canopy reach the opening, since large pieces may need lifting gear or a delivery outside trading hours.

What consents apply to revolving doors in Hampshire?

Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for revolving doors at premises in the Hampshire area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.

How much do revolving doors cost in Hampshire?

Until the survey is done, plan on £19,995 to £59,995 plus VAT per door. Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.

Hampshire at a glance
AreaHampshire
NationEngland
Towns covered33
Main townSouthampton
Planning regimeEngland: TCPA 1990 and the 2007 Advertisement Regulations
Building approvalBuilding Regulations (Approved Documents)
SurveyFree for new work, from our Great Barr base

Questions about revolving doors in Hampshire

Is my entrance in Southampton big enough for a revolving door?

It may be, if the frontage or lobby is generous. A 2.1m drum takes around 2.4m each way, and you'll need room for a side door as well.

Can you replace an old revolving door in Southampton?

Often, yes. We'd measure the existing drum and floor, then advise on refurbishing or replacing it, and a like-sized drum keeps the building work down.

Can a lobby in Hampshire stay open during installation?

Usually, with the side door or another entrance in use while the drum goes in. We'd agree the sequence with you before the floor work starts.

Do I need planning permission to change a shopfront in the Hampshire area?

Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.

Do I need listed building consent for a shopfront in the Hampshire area?

Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.

Planning revolving doors in Hampshire?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price