Few businesses can shut for a week, so any time on site for revolving doors in Leicestershire is planned around the hours you trade. Closed-day or out-of-hours installation can be arranged.
Openings are rarely square or level, so the survey for revolving doors records diagonals, pavement fall and head height at several points. Those few millimetres decide whether the finished front sits true against the building.

How should you approach revolving doors in Leicestershire?
Wind is usually the reason to choose a drum. For premises across Leicestershire, we look at how the entrance is exposed, because a corner that funnels weather into a lobby gains more from a revolving door than a sheltered street does.
A glass drum is one of the few things on a frontage you can light from inside. For premises in Leicestershire that trade into the evening, we'd plan the canopy lighting early, because the drum then works as a lantern at the entrance.
What consents apply to revolving doors in Leicestershire?
For revolving doors at premises in the Leicestershire area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
How much do revolving doors cost in Leicestershire?
We would budget £19,995 to £59,995 plus VAT per door. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
| Area | Leicestershire |
|---|---|
| Nation | England |
| Towns covered | 24 |
| Main town | Leicester |
| Planning regime | England: TCPA 1990 and the 2007 Advertisement Regulations |
| Building approval | Building Regulations (Approved Documents) |
| Survey | Free for new work, from our Great Barr base |
Questions about revolving doors in Leicestershire
Can you replace an old revolving door in Leicester?
Often, yes. We'd measure the existing drum and floor, then advise on refurbishing or replacing it, and a like-sized drum keeps the building work down.
Is my entrance in Leicester big enough for a revolving door?
It may be, if the frontage or lobby is generous. A 2.1m drum takes around 2.4m each way, and you'll need room for a side door as well.
Do you install revolving doors in Leicestershire?
Yes. We travel from Great Barr to survey the entrance, and the floor, structure and door are coordinated under one contract.
Do roller shutters need planning permission in the Leicestershire area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.
What rules apply to a fire exit door through a shopfront in the Leicestershire area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.