For revolving doors across South Yorkshire, we draw first and order later. You see a scale drawing with signed-off dimensions before anything is made, so the frontage on paper is the frontage you get.
Finishes behave differently at full size. Any sample we show you for revolving doors is better judged at the premises in daylight, since a colour that looks quiet on a desk can read much louder across a whole elevation.

What makes revolving doors work well for premises in South Yorkshire?
Hotels, offices and flagship stores all use a drum differently. For a lobby in Sheffield or elsewhere in South Yorkshire, we size the compartments for the people arriving, including their luggage, so the door never becomes the slowest part of the welcome.
Measure the floor before falling for the drum. If your building in South Yorkshire is an older one, the slab may fall toward the street, so we check levels across the full diameter and find out what lies beneath before choosing a drive.
What consents apply to revolving doors in South Yorkshire?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for revolving doors at premises in the South Yorkshire area: a planning application, or work that doesn't materially affect the external appearance.
How much do revolving doors cost in South Yorkshire?
The guide for revolving doors is £19,995 to £59,995 plus VAT per door. Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
| Area | South Yorkshire |
|---|---|
| Nation | England |
| Towns covered | 28 |
| Main town | Sheffield |
| Planning regime | England: TCPA 1990 and the 2007 Advertisement Regulations |
| Building approval | Building Regulations (Approved Documents) |
| Survey | Free for new work, from our Great Barr base |
Questions about revolving doors in South Yorkshire
Will a revolving door cut heating bills at premises in South Yorkshire?
It can, especially on an exposed entrance, because the wings stop through-draughts. The saving depends on footfall and on how the drum compares with the door you have now.
Can a lobby in South Yorkshire stay open during installation?
Usually, with the side door or another entrance in use while the drum goes in. We'd agree the sequence with you before the floor work starts.
Is my entrance in Sheffield big enough for a revolving door?
It may be, if the frontage or lobby is generous. A 2.1m drum takes around 2.4m each way, and you'll need room for a side door as well.
What rules apply to a fire exit door through a shopfront in the South Yorkshire area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Does the Equality Act apply to a shop entrance in the South Yorkshire area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.