Seen a frontage you admire? Bring the picture to our first talk about revolving doors in West Sussex, and we will work out what makes it succeed, from fascia depth to glass line, and what that means for your building.
Your frontage is read alongside its neighbours, so we note the fascia line, stallriser height and pilasters on either side before drawing revolving doors for West Sussex premises. Matching those lines or breaking them on purpose can both work, whereas doing it by accident never does.

How do we handle revolving doors for premises in West Sussex?
Getting a drum into the building takes some thought. For addresses in West Sussex, we check how the curved panels and canopy reach the opening, since large pieces may need lifting gear or a delivery outside trading hours.
Hotels, offices and flagship stores all use a drum differently. For a lobby in Chichester or elsewhere in West Sussex, we size the compartments for the people arriving, including their luggage, so the door never becomes the slowest part of the welcome.
What consents apply to revolving doors in West Sussex?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for revolving doors at premises in the West Sussex area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
How much do revolving doors cost in West Sussex?
Until the survey is done, plan on £19,995 to £59,995 plus VAT per door. Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.
| Area | West Sussex |
|---|---|
| Nation | England |
| Towns covered | 19 |
| Main town | Chichester |
| Planning regime | England: TCPA 1990 and the 2007 Advertisement Regulations |
| Building approval | Building Regulations (Approved Documents) |
| Survey | Free for new work, from our Great Barr base |
Questions about revolving doors in West Sussex
Can a lobby in West Sussex stay open during installation?
Usually, with the side door or another entrance in use while the drum goes in. We'd agree the sequence with you before the floor work starts.
Can you replace an old revolving door in Chichester?
Often, yes. We'd measure the existing drum and floor, then advise on refurbishing or replacing it, and a like-sized drum keeps the building work down.
Do you install revolving doors in West Sussex?
Yes. We travel from Great Barr to survey the entrance, and the floor, structure and door are coordinated under one contract.
What rules apply to a fire exit door through a shopfront in the West Sussex area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do roller shutters need planning permission in the West Sussex area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.