Refurbishment is a design job as much as a repair job. Small changes to colour, fascia depth and lighting can lift frontages in Oldham far more than their cost suggests.
Nothing gets ordered off the back of a survey in Oldham, because its job is to give us the numbers to draw and price from.

What makes shopfront refurbishment work well on Oldham premises?
If the glass is old, we look for the etched safety mark in the corner of each pane. Panes without one, in the door or at low level, should be replaced while the frontage is being worked on.
If your Oldham shopfront is aluminium and the frame is sound, a recoat can change the whole look. We check for corrosion and old sealant first, because paint will not hide either for long.
If the pavement falls across your frontage, let the stallriser take up the slope and keep the glass line dead level. The eye reads the long horizontal, so Oldham premises on a slope look settled once that line is true.
How much should you set aside for shopfront refurbishment in Oldham?
Until the survey is done, plan on £1,995 to £8,995 plus VAT depending on what is kept. Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.
Could shopfront refurbishment in Oldham need planning permission?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for shopfront refurbishment at premises in the Oldham area: a planning application, or work that doesn't materially affect the external appearance.
We confirm the position at survey, because a boundary or a special designation can change who handles the file, but applications from Oldham premises normally go to Oldham Metropolitan Borough Council.
| Town | Oldham |
|---|---|
| Area | Greater Manchester |
| Postcode districts | OL1, OL4, OL8, OL9 |
| Planning authority | Oldham Metropolitan Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 69 miles |
| Survey | Free for new work |
Questions about shopfront refurbishment in Oldham
Can a refurbishment make my Oldham premises easier to enter?
Often, yes. Lighter door closers, better handles and a lower threshold can all be added without replacing the frontage. We check the door width and the step at survey.
Is it worth refurbishing an old aluminium shopfront in Oldham?
Often, yes, if the frame is straight and the corners are tight. Recoating, new gaskets and better glass can add years of life. If the frame is corroded or the door has worn out its fixings, replacement may make more sense.
Can you repair a timber shopfront in Oldham?
Yes. Decayed sections are cut out and spliced with new hardwood, then primed and painted. That keeps the joinery you have, and it usually costs far less than making a new frontage.
Do I need planning permission to change a shopfront in the Oldham area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.
What rules apply to a fire exit door through a shopfront in the Oldham area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.