Shopfront refurbishment gives Renfrew premises a better frontage without starting from scratch. We survey what is sound, note what has failed and price the difference.
A survey in Renfrew usually starts outside, looking at the whole elevation before any tape comes out, because the frontage has to answer the building above it.

What goes into getting shopfront refurbishment right in Renfrew?
Where the frontage is timber, we probe the sills, bottom rails and door jambs before quoting. Rot usually starts low, and a spliced repair in hardwood can save more of the joinery than you might expect.
If later panels cover the original fascia, we lift a corner at survey. Surviving cornices, pilasters or tile can change the whole plan, and they cost nothing to keep.
A corner unit has two fronts to think about, and the return elevation often does as much selling as the main one. If that is your layout in Renfrew, carry the fascia and glass line round the corner and treat both faces as one composition.
How much could shopfront refurbishment in Renfrew cost you?
We would budget £1,995 to £8,995 plus VAT depending on what is kept. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
Which applications might shopfront refurbishment in Renfrew involve?
Section 26 of the Town and Country Planning (Scotland) Act 1997 sets the test: work that doesn't materially affect the external appearance isn't development. For shopfront refurbishment at premises in the Renfrew area, anything that does needs planning permission, and a true like-for-like replacement usually doesn't. The council confirms how that applies to each site.
For Renfrew, the usual route for planning and advert applications is through Renfrewshire Council, and we confirm that when we visit.
| Town | Renfrew |
|---|---|
| Area | Glasgow and Clyde |
| Postcode districts | PA4 |
| Planning authority | Renfrewshire Council |
| Building approval | Building warrant (Technical Handbook) |
| Distance from Great Barr | About 250 miles |
| Survey | Free for new work |
Questions about shopfront refurbishment in Renfrew
Can a refurbishment make my Renfrew premises easier to enter?
Often, yes. Lighter door closers, better handles and a lower threshold can all be added without replacing the frontage. We check the door width and the step at survey.
Will the work match my other premises in Glasgow and Clyde?
Yes, if you can share colour references and sign files from an existing site. We match finishes as closely as the frame allows, and we show you a sample first.
Can my Renfrew shopfront be refurbished without closing?
Usually, yes. Work is split into stages around your trading hours, and closed-day or out-of-hours work can be arranged for anything that affects the door.
Does a shop sign in the Renfrew area need advertisement consent?
Not always. Scotland's 1984 Regulations let an unlit sign within Class IV(1) go up without an application, and Class VI does the same for a lit sign with each character lit from within. Class VI isn't available in conservation areas, and one council says lit signs always need express consent, so ask first.
Which way must a fire exit door open on a shop in the Renfrew area?
In the direction of escape. Regulation 13(2) of the Fire Safety (Scotland) Regulations 2006 also rules out sliding and revolving doors on a dedicated fire exit and says fire exit doors can't be locked against immediate use. Duties sit with dutyholders under Part 3 of the Fire (Scotland) Act 2005, meaning the employer and any person with control of the premises.