Taking on a unit in Sevenoaks often means inheriting someone else's frontage. We work out what can stay, what can change and what it would cost.
It helps if you can be there when we visit Sevenoaks, since five minutes walking the frontage together answers more than a long email.

How would we approach shopfront refurbishment for your Sevenoaks premises?
Where the frontage is timber, we probe the sills, bottom rails and door jambs before quoting. Rot usually starts low, and a spliced repair in hardwood can save more of the joinery than you might expect.
Where the sign is the first thing that looks tired, we would start there and work down. A slimmer fascia and better letters can carry a modest frame very well.
Where units share one long run of fascia, breaking the height makes you stand out for the wrong reason. If that describes your Sevenoaks parade, keep the line and win attention with lettering, lighting and what's in the window.
What should you budget for shopfront refurbishment in Sevenoaks?
Allow £1,995 to £8,995 plus VAT depending on what is kept. Size and specification set most of that figure for shopfront refurbishment, and the rest depends on what the survey finds on site.
What consents could affect shopfront refurbishment in Sevenoaks?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for shopfront refurbishment at premises in the Sevenoaks area, an application is then likely. The council confirms which side of that line a job falls on.
Planning and advert applications for Sevenoaks premises normally go to Sevenoaks District Council. We check the position for your address at survey.
| Town | Sevenoaks |
|---|---|
| Area | Kent |
| Postcode districts | TN13 |
| Planning authority | Sevenoaks District Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 126 miles |
| Survey | Free for new work |
Questions about shopfront refurbishment in Sevenoaks
How do I know if my Sevenoaks shopfront needs replacing?
A measured survey will show you. We check the frame, joints, door and glass, then tell you plainly whether refurbishment will last or whether a new shopfront would be better value.
Can a refurbishment make my Sevenoaks premises easier to enter?
Often, yes. Lighter door closers, better handles and a lower threshold can all be added without replacing the frontage. We check the door width and the step at survey.
Will the work match my other premises in Kent?
Yes, if you can share colour references and sign files from an existing site. We match finishes as closely as the frame allows, and we show you a sample first.
What rules apply to a fire exit door through a shopfront in the Sevenoaks area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Does the Equality Act apply to a shop entrance in the Sevenoaks area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.