What should your premises say from across the road? We open every conversation about stallrisers and cladding in Berkshire with that question, then treat sightlines and proportion as seriously as the budget.
What sits behind the existing fascia often decides the job. Old beams, abandoned cable runs and earlier frames are common finds, which is why our visit to Berkshire premises looks past the surface before anything is drawn or priced for stallrisers and cladding.

How should you approach stallrisers and cladding in Berkshire?
Road grit does the most damage at this level. On premises across Berkshire that take winter salt or regular pavement washing, we fit a replaceable plinth so the lowest edge can be changed without disturbing the facing.
Stone and tile need a clean, dry surface and time to set. If your unit around Reading opens straight onto the pavement, we cut off site and keep the working area small so the entrance stays usable.
What consents apply to stallrisers and cladding in Berkshire?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for stallrisers and cladding at premises in the Berkshire area, an application is then likely. The council confirms which side of that line a job falls on.
How much do stallrisers and cladding cost in Berkshire?
As a working budget, use £195 to £495 plus VAT per m². Your place inside that range for stallrisers and cladding depends mostly on how much of the existing frontage can stay and how much has to be put right first.
| Area | Berkshire |
|---|---|
| Nation | England |
| Towns covered | 14 |
| Main town | Reading |
| Planning regime | England: TCPA 1990 and the 2007 Advertisement Regulations |
| Building approval | Building Regulations (Approved Documents) |
| Survey | Free for new work, from our Great Barr base |
Does Reading Borough Council publish shopfront guidance?
Yes, Design Guide for Shopfronts (2022). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- Stallrisers should be at least 300mm high with 450 to 700mm preferred, and have a moulded projecting cill.
- Fascia text should fill no more than half the fascia's width and height, and the house number should be included.
- Security shutters should be avoided in favour of laminated glass, with internal grilles next and solid shutters generally inappropriate.
Questions about stallrisers and cladding in Berkshire
Can you match an existing tiled stallriser on premises in Berkshire?
Often, yes, though an exact glaze match can be difficult. We take a sample tile, compare it with what is available, and suggest a specialist tile or a change at a natural break if the colour cannot be found.
Can you reclad only the stallriser on my premises in Berkshire?
Yes. It is one of the simplest ways to lift a tired frontage, provided the frame above is sound. We check the sill detail first, because a new facing must not trap water beneath it.
Can stallriser work on premises around Reading be done in a day?
A straightforward composite or painted panel often can, and fitting can be arranged on a closed day. Stone and tile take longer because of fixing and setting time, so we would agree a short phased plan.
What rules apply to a fire exit door through a shopfront in the Berkshire area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Does a new shopfront in the Berkshire area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.