For stallrisers and cladding across Mid Glamorgan, we draw first and order later. You see a scale drawing with signed-off dimensions before anything is made, so the frontage on paper is the frontage you get.
If you're a tenant, your landlord will probably want to see what is proposed. The scale drawings we produce for stallrisers and cladding are clear enough to send straight on, which saves a round of explaining.

What makes stallrisers and cladding work well for premises in Mid Glamorgan?
Stripping an old facing can reveal what the building had first. If original tile or timber turns up on your premises in Mid Glamorgan, we stop and talk to you, since repairing it may cost less than cladding over it.
A pavement that falls along the frontage needs careful handling. Where your premises in Mid Glamorgan sit on a slope, the sill stays level and the stallriser takes up the difference.
What consents apply to stallrisers and cladding in Mid Glamorgan?
Section 55 of the Town and Country Planning Act 1990 sets the test in Wales: work that doesn't materially affect the external appearance isn't development. Anything that does needs planning permission, and that goes for stallrisers and cladding at premises in the Mid Glamorgan area as much as for a full new frontage. The council confirms how the test applies to your site.
How much do stallrisers and cladding cost in Mid Glamorgan?
The guide for stallrisers and cladding is £195 to £495 plus VAT per m². Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
| Area | Mid Glamorgan |
|---|---|
| Nation | Wales |
| Towns covered | 17 |
| Main town | Bridgend |
| Planning regime | Wales: TCPA 1990 and the 1992 Advertisement Regulations |
| Building approval | Building Regulations (Approved Documents for Wales) |
| Survey | Free for new work, from our Great Barr base |
Does Rhondda Cynon Taf County Borough Council publish shopfront guidance?
Yes, Shopfront Design. It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- External roller shutters are a last resort after other security options are shown to be unsuitable.
- Solid metal shutters are unlikely to be acceptable, while lattice or brick-bond grille shutters may be considered.
- Individual shutters covering only the glazing are one option, and powder coating is generally preferred to paint.
Questions about stallrisers and cladding in Mid Glamorgan
How do I pick a stallriser finish for a unit in Mid Glamorgan?
Start with the brick, stone or render above the shop, then bring in the brand colour. Samples held against the building in daylight will tell you more than a screen, so try them in the morning and the evening.
Do you fit natural stone stallrisers across Mid Glamorgan?
Yes. Stone is templated from the measured survey, then fixed with mechanical restraints and a ventilated cavity. Heavier stone may need a check of the wall behind before we confirm the thickness.
Can you reclad only the stallriser on my premises in Mid Glamorgan?
Yes. It is one of the simplest ways to lift a tired frontage, provided the frame above is sound. We check the sill detail first, because a new facing must not trap water beneath it.
Is planning permission needed for a new shopfront in the Mid Glamorgan area?
Usually yes, if the work materially affects the external appearance, because Wales has no permitted development route for changing a shopfront. Most of the Planning (Wales) Act 2026 hasn't been commenced yet, so the existing rules apply. A true like-for-like replacement usually avoids an application, and the council confirms the position.
What access duty applies to a shop in the Mid Glamorgan area?
The Equality Act 2010 applies, in Wales as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it covers disabled people generally. A feature that meets a design standard is generally protected for 10 years.