Timber gives a shopfront in Brentford something metal can't: real depth, cast shadows and mouldings you can run your hand along. We draw each front to the measured opening and make it to those signed-off dimensions.
We measure your Brentford opening in person, at a time agreed with you first, so the visit fits around your trading.

How would we approach timber shopfronts for your Brentford premises?
Where a landlord in Brentford has set rules for materials or colour, timber is usually an easy conversation. We'd prepare a drawing and paint reference for approval, and adjust the mouldings if the terms ask for something plainer.
Narrow units suit timber well, because mouldings add interest where there's little width to work with. On a slim Brentford frontage we'd keep one strong pane, a panelled door and a fascia that doesn't crowd them.
Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Brentford premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.
What should you budget for timber shopfronts in Brentford?
We would budget £3,995 to £13,995 plus VAT for a typical frontage. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
What consents could affect timber shopfronts in Brentford?
For timber shopfronts at premises in the Brentford area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
Planning and advert applications for Brentford premises normally go to London Borough of Hounslow. We check the position for your address at survey.
| Town | Brentford |
|---|---|
| Area | Greater London |
| Postcode districts | TW7, TW8, TW9, W5 |
| Planning authority | London Borough of Hounslow |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 100 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Brentford
How much disruption will a timber front cause in my Brentford shop?
Expect more time on site than an aluminium front, typically 3 to 7 days with the painting. Closed-day or out-of-hours fitting can be arranged, and the opening stays boarded and secure between stages.
Will timber suffer on my Brentford frontage if it gets a lot of rain?
Not if the details are right. Sloped cills, sealed end grain and plinth blocks keep water moving, and the paint system then only has to deal with the weather, not trapped damp.
Can you fit a timber front around existing tiles in Brentford?
Often, yes, and it's usually worth trying. If your stallriser or entrance has good original tile, we'd measure it carefully and scribe the new joinery to it.
What rules apply to a fire exit door through a shopfront in the Brentford area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do roller shutters need planning permission in the Brentford area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.