We make timber shopfronts for Burnley premises, from plain painted frames to full cornice and console fronts. Every one starts with a measured survey and scale drawings.
We measure your Burnley opening in person, at a time agreed with you first, so the visit fits around your trading.

What should you think about before commissioning timber shopfronts in Burnley?
A brand rollout can include timber, as long as the details repeat. For a branch in Burnley we'd use the same mouldings, colours and sign panel as your other sites, adjusting only the widths and heights to fit the opening.
A corner plot gives a timber front two faces and one chance to get the turn right. For Burnley premises on a corner, we'd use a pilaster or a canted bay at the angle, so the cornice wraps round without a clumsy mitre.
Where units share one long run of fascia, breaking the height makes you stand out for the wrong reason. If that describes your Burnley parade, keep the line and win attention with lettering, lighting and what's in the window.
What is a realistic budget for timber shopfronts in Burnley?
We would budget £3,995 to £13,995 plus VAT for a typical frontage. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
Who approves timber shopfronts in Burnley?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for timber shopfronts at premises in the Burnley area, an application is then likely. The council confirms which side of that line a job falls on.
Planning and advert applications for Burnley premises normally go to Burnley Borough Council. We check the position for your address at survey.
| Town | Burnley |
|---|---|
| Area | Lancashire |
| Postcode districts | BB10, BB11 |
| Planning authority | Burnley Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 87 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Burnley
Can you copy a timber shopfront I've seen in Lancashire?
We can work from your photo and borrow what makes it succeed, including proportions, moulding sizes and colour. The front is then drawn to your own Burnley opening.
Can a timber front take a modern sign in Burnley?
Yes. Hand-painted letters suit a timber fascia well, and raised letters or a concealed trough light work too. We draw the sign and the joinery together, so the fixings don't cut through a moulding.
Will timber suffer on my Burnley frontage if it gets a lot of rain?
Not if the details are right. Sloped cills, sealed end grain and plinth blocks keep water moving, and the paint system then only has to deal with the weather, not trapped damp.
What rules apply to a fire exit door through a shopfront in the Burnley area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Does a new shopfront in the Burnley area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.