We make timber shopfronts for Codicote premises, from plain painted frames to full cornice and console fronts. Every one starts with a measured survey and scale drawings.
It helps if you can be there when we visit Codicote, since five minutes walking the frontage together answers more than a long email.

What should you think about before commissioning timber shopfronts in Codicote?
A corner plot gives a timber front two faces and one chance to get the turn right. For Codicote premises on a corner, we'd use a pilaster or a canted bay at the angle, so the cornice wraps round without a clumsy mitre.
Narrow units suit timber well, because mouldings add interest where there's little width to work with. On a slim Codicote frontage we'd keep one strong pane, a panelled door and a fascia that doesn't crowd them.
Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Codicote premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.
What is a realistic budget for timber shopfronts in Codicote?
A sensible starting budget is £3,995 to £13,995 plus VAT for a typical frontage. What shifts the figure is whatever can't be seen yet, such as the condition behind the old frontage or the services running through it.
Who approves timber shopfronts in Codicote?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for timber shopfronts at premises in the Codicote area, an application is then likely. The council confirms which side of that line a job falls on.
For Codicote, the usual route for planning and advert applications is through North Hertfordshire District Council, and we confirm that when we visit.
| Town | Codicote |
|---|---|
| Area | Hertfordshire |
| Postcode districts | AL6, AL8, SG3 |
| Planning authority | North Hertfordshire District Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 86 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Codicote
What should I budget for looking after a timber front in Codicote?
A repaint every 5 to 7 years, plus a yearly wash and touch-up of the cills. Door gear needs checking too, since seasonal movement can throw a door out of line.
How much disruption will a timber front cause in my Codicote shop?
Expect more time on site than an aluminium front, typically 3 to 7 days with the painting. Closed-day or out-of-hours fitting can be arranged, and the opening stays boarded and secure between stages.
Will timber suffer on my Codicote frontage if it gets a lot of rain?
Not if the details are right. Sloped cills, sealed end grain and plinth blocks keep water moving, and the paint system then only has to deal with the weather, not trapped damp.
What rules apply to a fire exit door through a shopfront in the Codicote area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do roller shutters need planning permission in the Codicote area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.