A well-made timber front should still look good in Stevenage long after the first coat of paint has gone. That comes from choosing a durable timber, sealing the end grain and keeping water away from the bottom of every member.
Please have keys to any meter cupboards and shutter housings to hand when we survey in Stevenage, because what sits behind them can change the drawing.

What goes into getting timber shopfronts right in Stevenage?
In a parade of mixed fronts in Stevenage, painted timber can lift a unit without shouting. We'd take the height of the neighbouring cills and fascias, then let the depth of the mouldings and a considered colour do the talking.
Narrow units suit timber well, because mouldings add interest where there's little width to work with. On a slim Stevenage frontage we'd keep one strong pane, a panelled door and a fascia that doesn't crowd them.
Where a fascia has crept down over the years, lifting it back to its original line can add real height to the glass. Check what sits behind it first at Stevenage premises, since a shutter box or old beam may set the limit.
Which applications might timber shopfronts in Stevenage involve?
For timber shopfronts at premises in the Stevenage area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
Planning and advert applications for Stevenage premises normally go to Stevenage Borough Council. We check the position for your address at survey.
How much could timber shopfronts in Stevenage cost you?
Allow £3,995 to £13,995 plus VAT for a typical frontage. Size and specification set most of that figure for timber shopfronts, and the rest depends on what the survey finds on site.
| Town | Stevenage |
|---|---|
| Area | Hertfordshire |
| Postcode districts | SG1, SG2 |
| Planning authority | Stevenage Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 85 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Stevenage
Is timber a sensible choice for my Stevenage frontage?
Usually, if you're happy with a repaint every 5 to 7 years. A survey shows how exposed the front is and whether the structure behind it is sound, and we'll tell you if aluminium would serve you better.
Can you fit a timber front around existing tiles in Stevenage?
Often, yes, and it's usually worth trying. If your stallriser or entrance has good original tile, we'd measure it carefully and scribe the new joinery to it.
How much disruption will a timber front cause in my Stevenage shop?
Expect more time on site than an aluminium front, typically 3 to 7 days with the painting. Closed-day or out-of-hours fitting can be arranged, and the opening stays boarded and secure between stages.
What rules apply to a fire exit door through a shopfront in the Stevenage area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Does the Equality Act apply to a shop entrance in the Stevenage area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.