0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Timber shopfronts
  4. Felling

Timber shopfronts in Felling

One itemised price and one named contact for Felling premises.

We make timber shopfronts for Felling premises, from plain painted frames to full cornice and console fronts. Every one starts with a measured survey and scale drawings.

Measuring the opening is the easy part of a survey in Felling. We also look at the beam above, the pavement fall and any meters or drains nearby.

Painted timber shopfront with a moulded cornice, panelled stallriser and glazed double doors

What goes into getting timber shopfronts right in Felling?

A corner plot gives a timber front two faces and one chance to get the turn right. For Felling premises on a corner, we'd use a pilaster or a canted bay at the angle, so the cornice wraps round without a clumsy mitre.

A brand rollout can include timber, as long as the details repeat. For a branch in Felling we'd use the same mouldings, colours and sign panel as your other sites, adjusting only the widths and heights to fit the opening.

Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Felling premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.

Which applications might timber shopfronts in Felling involve?

A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for timber shopfronts at premises in the Felling area, an application is then likely. The council confirms which side of that line a job falls on.

At survey we check how things stand for your building, although applications for planning permission or advertisement consent here normally go to Gateshead Metropolitan Borough Council.

How much could timber shopfronts in Felling cost you?

Our guide band is £3,995 to £13,995 plus VAT for a typical frontage. Scope is the biggest lever, so a tighter brief for timber shopfronts brings the figure down faster than any change of detail.

Felling at a glance
TownFelling
AreaTyne and Wear
Postcode districtsNE10, NE6, NE8, NE9
Planning authorityGateshead Metropolitan Borough Council
Building approvalBuilding Regulations (Approved Documents)
Distance from Great BarrAbout 167 miles
SurveyFree for new work

Questions about timber shopfronts in Felling

Will timber suffer on my Felling frontage if it gets a lot of rain?

Not if the details are right. Sloped cills, sealed end grain and plinth blocks keep water moving, and the paint system then only has to deal with the weather, not trapped damp.

How much disruption will a timber front cause in my Felling shop?

Expect more time on site than an aluminium front, typically 3 to 7 days with the painting. Closed-day or out-of-hours fitting can be arranged, and the opening stays boarded and secure between stages.

Can a timber front take a modern sign in Felling?

Yes. Hand-painted letters suit a timber fascia well, and raised letters or a concealed trough light work too. We draw the sign and the joinery together, so the fixings don't cut through a moulding.

Does the Equality Act apply to a shop entrance in the Felling area?

Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.

Do I need listed building consent for a shopfront in the Felling area?

Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.

Planning timber shopfronts in Felling?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price