A slim framed slider can sit inside an existing Felling frontage with little change to the outside. The drive hides behind the fascia, and the leaves line up with the screens either side.
Your survey is where the price gets real, because widths, heights, levels and access are all taken on site in Felling.

How do you design around the building when planning automatic sliding doors in Felling?
In a parade in Felling with a narrow pavement, the sensor set-up is the first job. We'd angle the radar so people walking past don't trigger the door, and keep the leaves in line with the neighbouring frontage.
A corner unit in Felling can often move its entrance to the angle, where two directions of footfall meet. We'd look at a curved or canted door set, and check the wind on both streets before fixing the position.
Where a fascia has crept down over the years, lifting it back to its original line can add real height to the glass. Check what sits behind it first at Felling premises, since a shutter box or old beam may set the limit.
What might automatic sliding doors cost in Felling?
Our guide band is £3,895 to £11,995 plus VAT per entrance. Scope is the biggest lever, so a tighter brief for automatic sliding doors brings the figure down faster than any change of detail.
What permissions should you check for automatic sliding doors in Felling?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for automatic sliding doors at premises in the Felling area: a planning application, or work that doesn't materially affect the external appearance.
We confirm the position at survey, because a boundary or a special designation can change who handles the file, but applications from Felling premises normally go to Gateshead Metropolitan Borough Council.
| Town | Felling |
|---|---|
| Area | Tyne and Wear |
| Postcode districts | NE10, NE6, NE8, NE9 |
| Planning authority | Gateshead Metropolitan Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 167 miles |
| Survey | Free for new work |
Questions about automatic sliding doors in Felling
What will people on the street see at my Felling entrance?
Ideally, very little. The drive sits behind the fascia, the leaves line up with the screens beside them, and the frame colour matches the rest of your front.
What do I need to arrange for a door in Felling?
Usually just a power supply near the head, and we'll tell you exactly what at survey. We can bring that into the one contract if you'd rather not chase an electrician.
Will an automatic door fit my Felling shop?
It depends on the width of the front and the depth at the head. A survey shows whether the parked leaves fit and where the operator can hide, and if a slider won't work we'd look at a powered swing door.
Does the Equality Act apply to a shop entrance in the Felling area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.
Does a shop sign in the Felling area need advertisement consent?
Not always. In England, an unlit sign within Class 5 of the 2007 Advertisement Regulations generally needs no application, and neither does a lit sign within Class 4B. Anything outside those classes needs consent, and Class 4B isn't available in conservation areas, so check before ordering.