Across Greater London, timber is the material we suggest when a building has proportions worth respecting. For Hackney premises, we set the stallriser, pilasters and fascia from the elevation above, then detail the joinery to match.
Please have keys to any meter cupboards and shutter housings to hand when we survey in Hackney, because what sits behind them can change the drawing.

What makes timber shopfronts work well on Hackney premises?
In a parade of mixed fronts in Hackney, painted timber can lift a unit without shouting. We'd take the height of the neighbouring cills and fascias, then let the depth of the mouldings and a considered colour do the talking.
If your Hackney premises have a deep recessed entrance, timber can make it feel like a welcome. We'd panel the returns, add a lit soffit and lay a hard-wearing threshold, keeping the end grain of every post clear of the wet.
If the pavement falls across your frontage, let the stallriser take up the slope and keep the glass line dead level. The eye reads the long horizontal, so Hackney premises on a slope look settled once that line is true.
Could timber shopfronts in Hackney need planning permission?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for timber shopfronts at premises in the Hackney area: a planning application, or work that doesn't materially affect the external appearance.
Planning and advert applications for Hackney premises normally go to London Borough of Hackney. We check the position for your address at survey.
How much should you set aside for timber shopfronts in Hackney?
We would budget £3,995 to £13,995 plus VAT for a typical frontage. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
| Town | Hackney |
|---|---|
| Area | Greater London |
| Postcode districts | E8, E9 |
| Planning authority | London Borough of Hackney |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 105 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Hackney
How much disruption will a timber front cause in my Hackney shop?
Expect more time on site than an aluminium front, typically 3 to 7 days with the painting. Closed-day or out-of-hours fitting can be arranged, and the opening stays boarded and secure between stages.
Is timber a sensible choice for my Hackney frontage?
Usually, if you're happy with a repaint every 5 to 7 years. A survey shows how exposed the front is and whether the structure behind it is sound, and we'll tell you if aluminium would serve you better.
Do you make the joinery for Hackney shops to order?
Yes. Every length is made to the signed-off drawings for your opening, then brought to Hackney from Great Barr by vetted teams working under S&K Glazing.
What rules apply to a fire exit door through a shopfront in the Hackney area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Does a new shopfront in the Hackney area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.