Colour and craft do the work on a timber front in Hammersmith. We test paint on your actual frontage, draw any moulding that matters at full size, and keep every dimension on paper for you to sign off.
Please have keys to any meter cupboards and shutter housings to hand when we survey in Hammersmith, because what sits behind them can change the drawing.

What should you think about before commissioning timber shopfronts in Hammersmith?
If your Hammersmith premises have a deep recessed entrance, timber can make it feel like a welcome. We'd panel the returns, add a lit soffit and lay a hard-wearing threshold, keeping the end grain of every post clear of the wet.
A south or west-facing Hammersmith frontage is hard on paint. We'd steer you toward a lighter colour or a more stable timber, and if the brand needs a dark finish, we'd plan a shorter repaint interval from the outset.
If the pavement falls across your frontage, let the stallriser take up the slope and keep the glass line dead level. The eye reads the long horizontal, so Hammersmith premises on a slope look settled once that line is true.
What is a realistic budget for timber shopfronts in Hammersmith?
We would budget £3,995 to £13,995 plus VAT for a typical frontage. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
Who approves timber shopfronts in Hammersmith?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for timber shopfronts at premises in the Hammersmith area, an application is then likely. The council confirms which side of that line a job falls on.
For Hammersmith, the usual route for planning and advert applications is through London Borough of Hammersmith & Fulham, and we confirm that when we visit.
| Town | Hammersmith |
|---|---|
| Area | Greater London |
| Postcode districts | W6 |
| Planning authority | London Borough of Hammersmith & Fulham |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 102 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Hammersmith
Can you fit a timber front around existing tiles in Hammersmith?
Often, yes, and it's usually worth trying. If your stallriser or entrance has good original tile, we'd measure it carefully and scribe the new joinery to it.
What should I budget for looking after a timber front in Hammersmith?
A repaint every 5 to 7 years, plus a yearly wash and touch-up of the cills. Door gear needs checking too, since seasonal movement can throw a door out of line.
Can a timber front take a modern sign in Hammersmith?
Yes. Hand-painted letters suit a timber fascia well, and raised letters or a concealed trough light work too. We draw the sign and the joinery together, so the fixings don't cut through a moulding.
Do I need planning permission to change a shopfront in the Hammersmith area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.
What rules apply to a fire exit door through a shopfront in the Hammersmith area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.