If you've admired a painted shopfront and wondered why yours can't look like that, it usually can. Send us the photo, and we'll draw a timber front for your Oakwood premises that captures what you liked.
Bring whatever you have to the survey in Oakwood: brand guidelines, lease plans, old drawings or a photo of a frontage you admire.

How do you design around the building when planning timber shopfronts in Oakwood?
In a parade of mixed fronts in Oakwood, painted timber can lift a unit without shouting. We'd take the height of the neighbouring cills and fascias, then let the depth of the mouldings and a considered colour do the talking.
Narrow units suit timber well, because mouldings add interest where there's little width to work with. On a slim Oakwood frontage we'd keep one strong pane, a panelled door and a fascia that doesn't crowd them.
If the pavement falls across your frontage, let the stallriser take up the slope and keep the glass line dead level. The eye reads the long horizontal, so Oakwood premises on a slope look settled once that line is true.
What might timber shopfronts cost in Oakwood?
Until the survey is done, plan on £3,995 to £13,995 plus VAT for a typical frontage. Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.
What permissions should you check for timber shopfronts in Oakwood?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for timber shopfronts at premises in the Oakwood area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
Oakwood applications for planning permission or advertisement consent are normally handled by London Borough of Enfield. Our survey includes a check of the position for your address.
| Town | Oakwood |
|---|---|
| Area | Greater London |
| Postcode districts | EN2, EN4, N14, N21 |
| Planning authority | London Borough of Enfield |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 98 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Oakwood
Do you make the joinery for Oakwood shops to order?
Yes. Every length is made to the signed-off drawings for your opening, then brought to Oakwood from Great Barr by vetted teams working under S&K Glazing.
Can you fit a timber front around existing tiles in Oakwood?
Often, yes, and it's usually worth trying. If your stallriser or entrance has good original tile, we'd measure it carefully and scribe the new joinery to it.
Will timber suffer on my Oakwood frontage if it gets a lot of rain?
Not if the details are right. Sloped cills, sealed end grain and plinth blocks keep water moving, and the paint system then only has to deal with the weather, not trapped damp.
Do I need listed building consent for a shopfront in the Oakwood area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.
Does a shop sign in the Oakwood area need advertisement consent?
Not always. In England, an unlit sign within Class 5 of the 2007 Advertisement Regulations generally needs no application, and neither does a lit sign within Class 4B. Anything outside those classes needs consent, and Class 4B isn't available in conservation areas, so check before ordering.