We make timber shopfronts for Stockport premises, from plain painted frames to full cornice and console fronts. Every one starts with a measured survey and scale drawings.
A survey in Stockport usually starts outside, looking at the whole elevation before any tape comes out, because the frontage has to answer the building above it.

What goes into getting timber shopfronts right in Stockport?
Where a landlord in Stockport has set rules for materials or colour, timber is usually an easy conversation. We'd prepare a drawing and paint reference for approval, and adjust the mouldings if the terms ask for something plainer.
If your Stockport premises have a deep recessed entrance, timber can make it feel like a welcome. We'd panel the returns, add a lit soffit and lay a hard-wearing threshold, keeping the end grain of every post clear of the wet.
Where a fascia has crept down over the years, lifting it back to its original line can add real height to the glass. Check what sits behind it first at Stockport premises, since a shutter box or old beam may set the limit.
Which applications might timber shopfronts in Stockport involve?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for timber shopfronts at premises in the Stockport area, an application is then likely. The council confirms which side of that line a job falls on.
For Stockport, the usual route for planning and advert applications is through Stockport Metropolitan Borough Council, and we confirm that when we visit.
How much could timber shopfronts in Stockport cost you?
As a working budget, use £3,995 to £13,995 plus VAT for a typical frontage. Your place inside that range for timber shopfronts depends mostly on how much of the existing frontage can stay and how much has to be put right first.
| Town | Stockport |
|---|---|
| Area | Greater Manchester |
| Postcode districts | SK1, SK2, SK3, SK4 |
| Planning authority | Stockport Metropolitan Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 60 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Stockport
Can a timber front take a modern sign in Stockport?
Yes. Hand-painted letters suit a timber fascia well, and raised letters or a concealed trough light work too. We draw the sign and the joinery together, so the fixings don't cut through a moulding.
Can you copy a timber shopfront I've seen in Greater Manchester?
We can work from your photo and borrow what makes it succeed, including proportions, moulding sizes and colour. The front is then drawn to your own Stockport opening.
What should I budget for looking after a timber front in Stockport?
A repaint every 5 to 7 years, plus a yearly wash and touch-up of the cills. Door gear needs checking too, since seasonal movement can throw a door out of line.
What rules apply to a fire exit door through a shopfront in the Stockport area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do roller shutters need planning permission in the Stockport area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.