Timber gives a shopfront in Washington something metal can't: real depth, cast shadows and mouldings you can run your hand along. We draw each front to the measured opening and make it to those signed-off dimensions.
It helps if you can be there when we visit Washington, since five minutes walking the frontage together answers more than a long email.

How would we approach timber shopfronts for your Washington premises?
A corner plot gives a timber front two faces and one chance to get the turn right. For Washington premises on a corner, we'd use a pilaster or a canted bay at the angle, so the cornice wraps round without a clumsy mitre.
Where a landlord in Washington has set rules for materials or colour, timber is usually an easy conversation. We'd prepare a drawing and paint reference for approval, and adjust the mouldings if the terms ask for something plainer.
Where units share one long run of fascia, breaking the height makes you stand out for the wrong reason. If that describes your Washington parade, keep the line and win attention with lettering, lighting and what's in the window.
What consents could affect timber shopfronts in Washington?
For timber shopfronts at premises in the Washington area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
Expect planning and advert applications here to go to Sunderland City Council in the normal way. We check what that means for your building when we survey it in Washington.
What should you budget for timber shopfronts in Washington?
As a working budget, use £3,995 to £13,995 plus VAT for a typical frontage. Your place inside that range for timber shopfronts depends mostly on how much of the existing frontage can stay and how much has to be put right first.
| Town | Washington |
|---|---|
| Area | Tyne and Wear |
| Postcode districts | NE37, NE38 |
| Planning authority | Sunderland City Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 163 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Washington
Do you make the joinery for Washington shops to order?
Yes. Every length is made to the signed-off drawings for your opening, then brought to Washington from Great Barr by vetted teams working under S&K Glazing.
Will timber suffer on my Washington frontage if it gets a lot of rain?
Not if the details are right. Sloped cills, sealed end grain and plinth blocks keep water moving, and the paint system then only has to deal with the weather, not trapped damp.
Is timber a sensible choice for my Washington frontage?
Usually, if you're happy with a repaint every 5 to 7 years. A survey shows how exposed the front is and whether the structure behind it is sound, and we'll tell you if aluminium would serve you better.
What rules apply to a fire exit door through a shopfront in the Washington area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Does a new shopfront in the Washington area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.