0800 088 6248 Get a guide price
  1. Home
  2. Sectors
  3. Galleries and studios

Shopfronts for galleries and studios

A quiet front that gives the work the attention, and lets the crates through.

A gallery or studio needs a quiet front, glass that keeps colour true and a way to get large pieces inside. The frontage should behave like the first wall of the show.

Gallery frontage with one large low-iron pane, a thin dark frame and a single artwork in view

What glass shows artwork most truthfully?

Low-iron glass, because standard glass carries a green tint that shows on whites and pale stone.

That tint builds with thickness, so a laminated pane shows it more than a thin one. Specify low-iron for every layer of a laminate, then judge samples on site against a sheet of white card. Reflections matter as much as tint: a dark ceiling just inside the window often helps more than any coating.

How do you get large work through a gallery door?

Plan around the largest crate you expect, then draw the door, lobby and any turn behind it. The options are simple, and each one affects how the front looks every day.

Check the route beyond the door as well. A wide opening is wasted if the crate then meets a tight lobby, a low transom or a stepped floor.

  • Wide paired doors, with one leaf bolted in daily use
  • A demountable glazed panel, for pieces larger than any sensible door
  • Flush bolts that one technician can release alone
  • A level threshold, so pallet trucks and wheelchairs share one route

How should a gallery sign itself?

Quietly: a slim fascia, small built-up letters or one line etched into the glass.

Changing shows suit removable vinyl, which lets the window carry the current exhibition without touching the permanent sign. A small projecting sign does what a large fascia would, since it catches people walking along the pavement. Fix any sign into mortar joints on older brickwork, so the holes can be repaired later.

How do you control daylight on the work?

Filter ultraviolet with laminated glass, then keep direct sun off the work through layout, as no glass removes visible light.

A deep reveal or slim fin can shade an east or west front. Inside, hang sensitive pieces on walls at right angles to the window, and take a conservator's advice where a lender or insurer asks for it. Blinds held within the frame stay invisible from the street when raised.

After dark the balance reverses, and a single lit work seen through the glass can do more than any sign. Put one circuit on a timer, so that view stays on after the doors close.

What does a working studio need that a gallery doesn't?

Privacy on demand, and a front that still looks cared for when nobody is in.

Studio windows often go unstaffed for days, so an etched band or a blind in the frame works harder than dressing. Add a call point for visitors, wide access for deliveries and a sign that says what happens inside.

Some makers want the reverse of a gallery: north light, no display and a plain door. Clear upper panes above an etched band give daylight without an audience.

Common questions

Do gallery frontages need shutters?

Not always. An external shutter hides the show after hours, so laminated glass with an internal perforated shutter is often the first thing to try.

Can the whole front be one pane?

Sometimes. Structure, delivery and handling set the limit, so we confirm the largest workable pane at survey.

Can window graphics change between shows?

Yes, removable vinyl suits that well. Keep the required markings on glazed doors and screens when it comes off.

Will an insurer or lender specify the glass?

Some may, so ask them first. We supply the glass specification, with test certificates where they apply.

Services for this sector

Tell us about your frontage

Send the address and a photo. We'll come and measure it, at no cost.

Call usGet a guide price