Few businesses can shut for a week, so any time on site for aluminium shopfronts in Dyfed is planned around the hours you trade. Closed-day or out-of-hours installation can be arranged.
Openings are rarely square or level, so the survey for aluminium shopfronts records diagonals, pavement fall and head height at several points. Those few millimetres decide whether the finished front sits true against the building.

What should you look for from aluminium shopfronts in Dyfed?
If your premises in Dyfed face the sea or a main road, the finish plan changes before the colour does. Salt and traffic film are harder on a coating, so we'd look at pre-treatment, fixings and a realistic cleaning routine from the first drawing.
Large panes set the logistics for any aluminium front in Dyfed. We look at where a glass vehicle can stop, how far the panes must be carried and whether a lifting aid will fit, because a 3m sheet that can't reach the opening on the day is a wasted trip.
What consents apply to aluminium shopfronts in Dyfed?
The existing rules still apply in Wales, because most of the Planning (Wales) Act 2026 is waiting for a commencement order. For aluminium shopfronts at premises in the Dyfed area, building work that materially affects the external appearance needs planning permission, while a true like-for-like replacement usually doesn't. The council confirms the current position.
How much do aluminium shopfronts cost in Dyfed?
We would budget £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
| Area | Dyfed |
|---|---|
| Nation | Wales |
| Towns covered | 7 |
| Main town | Carmarthen |
| Planning regime | Wales: TCPA 1990 and the 1992 Advertisement Regulations |
| Building approval | Building Regulations (Approved Documents for Wales) |
| Survey | Free for new work, from our Great Barr base |
Does Carmarthenshire County Council publish shopfront guidance?
Yes, Carmarthenshire Shopfront Design Guide 2022 (2022). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- The fascia should be no deeper than the console and sit just below the cornice, and box fascias are not permitted.
- External roller shutters, external grilles and solid metal shutters are not permitted, with internal lattice or brick-bond grilles preferred.
- Internally lit signs are not permitted, and fascias should be lit externally with discreet downward-facing fittings.
Questions about aluminium shopfronts in Dyfed
How long would an aluminium shopfront take in Dyfed?
Typically 2 to 4 weeks to fabricate once drawings are signed off, then 1 to 5 days on site. The programme depends on the opening rather than the postcode, so it is set after the measured survey.
Do you fit aluminium shopfronts across Dyfed?
Yes. We travel from Great Barr to survey and fit across Dyfed, using vetted teams working under S&K Glazing with one named contact for the job.
Does the distance to Dyfed change the quote?
Any travel or access cost sits on its own line in the itemised quotation, so you can see it. Scaffolding, restricted delivery times and lifting gear tend to matter more than mileage.
Can a shop fire exit in the Dyfed area use a sliding door?
No, a dedicated fire exit can't be a sliding or revolving door. In Wales, article 14(2) of the Regulatory Reform (Fire Safety) Order 2005 also says fire exit doors must open in the direction of escape and can't be locked against immediate use. The responsible person holds that duty, normally the employer or whoever controls the premises for a business, otherwise the owner.
Who decides listed building consent for a shopfront in the Dyfed area?
Planning authorities and Welsh Ministers share control of listed building consent in Wales, under the Historic Environment (Wales) Act 2023. Cadw is the national body, and the 1990 Act no longer applies. Ask the council where an application should start.