Few businesses can shut for a week, so any time on site for aluminium shopfronts in Fife is planned around the hours you trade. Closed-day or out-of-hours installation can be arranged.
Finishes behave differently at full size. Any sample we show you for aluminium shopfronts is better judged at the premises in daylight, since a colour that looks quiet on a desk can read much louder across a whole elevation.

How should you approach aluminium shopfronts in Fife?
A unit in Dunfermline may only be able to close overnight, while a shop on a quieter street might prefer a midweek closed day. We plan the strip-out around your takings, and the fitting sequence follows from that.
Large panes set the logistics for any aluminium front in Fife. We look at where a glass vehicle can stop, how far the panes must be carried and whether a lifting aid will fit, because a 3m sheet that can't reach the opening on the day is a wasted trip.
What consents apply to aluminium shopfronts in Fife?
Section 26 of the Town and Country Planning (Scotland) Act 1997 sets the test: work that doesn't materially affect the external appearance isn't development. For aluminium shopfronts at premises in the Fife area, anything that does needs planning permission, and a true like-for-like replacement usually doesn't. The council confirms how that applies to each site.
How much do aluminium shopfronts cost in Fife?
We would budget £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
| Area | Fife |
|---|---|
| Nation | Scotland |
| Towns covered | 9 |
| Main town | Dunfermline |
| Planning regime | Scotland: 1997 Planning Act and the 1984 Advertisement Regulations |
| Building approval | Building warrant (Technical Handbook) |
| Survey | Free for new work, from our Great Barr base |
Does Fife Council publish shopfront guidance?
Yes, Shop Front Design Guidelines (2016). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- Solid security shutters are discouraged, and shutter boxes may not project in front of the shop front.
- Internal lattice shutters and reinforced laminated glass are encouraged in town centres, with demountable mesh grilles preferred on traditional shop fronts.
- Each shop normally gets one fascia sign and one projecting sign, and only one of them may be lit.
Questions about aluminium shopfronts in Fife
Do you fit aluminium shopfronts across Fife?
Yes. We travel from Great Barr to survey and fit across Fife, using vetted teams working under S&K Glazing with one named contact for the job.
Can you work with our shopfitter in Fife?
Yes. We can supply the front as one package within a wider fit-out, working to the shopfitter's programme and agreeing the floor, ceiling and signage interfaces on the drawings.
Can you match other units we run in Fife?
Yes, if we can see what is already there. We record the section, colour and stallriser detail from your existing front, then draw the new unit to sit with it.
Do I need planning permission to alter a shopfront in the Fife area?
Usually yes, if the work materially affects the external appearance. Class 9A, Scotland's shop permitted development right, doesn't cover work that alters or extends beyond the existing front. A true like-for-like replacement usually needs no permission, and the council confirms the position.
Which way must a fire exit door open on a shop in the Fife area?
In the direction of escape. Regulation 13(2) of the Fire Safety (Scotland) Regulations 2006 also rules out sliding and revolving doors on a dedicated fire exit and says fire exit doors can't be locked against immediate use. Duties sit with dutyholders under Part 3 of the Fire (Scotland) Act 2005, meaning the employer and any person with control of the premises.